Probabilistic Prediction of Losses to Lifeline Systems Due to Earthquakes
An efficient and practical method for earthquake loss estimation for lifelines is developed, using the recent advances made in the areas of lifeline earthquake engineering and probabilistic...
Recent Lifeline Seismic Risk Studies
This monograph is a collection of four papers presented at the 1990 Annual Civil Engineering Convention and Exposition in San Francisco, California. The papers summarize seismic loss and...
Seismic Design of Liquid Storage Tanks
Originally published in: Journal of the Technical Councils, ASCE, TC1, April 1981...
Orchestral Maneuvers
Symphony Towers is an H-shaped superstructure that straddles Symphony Hall in downtown San Diego. The $143 million project is a 34-story office building to the south of the hall and a...
Assessment of Conductors
This paper deals with the mechanical integrity of conductors after several years in service and discusses current innovative conductor designs which benefit the structural designer working...
Six Story Tubular Atrium
The author designed an atrium structure with two stair-stepped atriums placed at 45? to the tower 'Figueroa at Wilshire' in Los Angeles, California. This structure...
Brace Behavior in a Structural Steel Seismic Retrofitting Scheme
A two thirds scale non-ductile reinforced concrete frame strengthened by an external structural steel bracing scheme was constructed and tested in the laboratory. The frame was subjected...
Seismic Behavior of Built-Up Bracing Members
The influence of stitch design and local buckling on the seismic behavior of welded bracing members made of double angles is studied in this paper. Performance of boxed configuration with...
Seismic Response of Flexibly-Connected Steel Frames
The response of typical low-rise steel building frames designed by the 'Type 2 Construction' method to moderate earthquakes is examined. Such frames are often...
Tests on Brace and Link Connections for EBFs
This paper describes recent test results on the behavior of selected connections for seismic-resistant Eccentrically Braced Frames (EBFs). These tests provided data on the performance...
Brace Connections for Ductility
Influence of connection design on the seismic behavior of welded bracing members made of double channels is studied in this paper. Shortcomings of commonly used connection details as per...
End Plate Moment Connections for Cyclic Loads
Three pilot tests of full size end plate moment connections under cyclic loading are discussed. In one of the specimens, the premature fracture of one of the inner bolts suggests the possibility...
Experiments on Active Structural Control Under Seismic Loads
Two control systems, an active tendon system and an active mass damper system are selected for study for possible real structural implementation. Presented in this paper are simulation...
Optimal Location of Active Controllers Subjected to Seismic Excitation
In the application of structural control to seismic structures certain locations are advantageous for placement of the actuators. These locations reduce the structure's response...
A Comparison of Performances of Various Frictional Base Isolation Systems
The results of a comparative study of the performances of several frictional base isolation devices including the Sliding-Joint, the French System, and the Resilient-Friction isolators...
Frequency Response Design of Controlled Structures
The installation of optimal control systems has been shown to be effective in reducing the vibration responses of structures. In addition to the effectiveness, there are many factors that...
Applications of Fuzzy Mathematical Programming in Structural Optimization
In this paper, several applications of fuzzy mathematical programming in structural optimization are reviewed and discussed. In addition, a formulation of optimum earthquake resistant...
A KBES for Seismic Design of Buildings
A knowledge-based expert system for earthquake resistant design of buildings is described. The knowledge-intensive nature of the domain and the consequent motivation for an expert-system...
An Integrated Knowledge System of Seismic Vulnerability and Risk for Engineered Facilities
This paper describes an integrated knowledge system for the assessment of the seismic vulnerability and risk of engineered facilities. The system integrates knowledge from many fields...
A Knowledge Based System for Deriving Qualitative Seismic Behavior
The analysis and design of complex or critical facilities, such as tall buildings, nuclear power plants, offshore structures, or cable stayed bridges requires that these facilities be...
Return to search