Interim Spent-Fuel Storage Options at Commercial Nuclear Power Plants
Although spent fuel can be stored safely in waterfilled pools at reactor sites, some utilities may not possess sufficient space for life-of-plant storage capability. In-pool storage capability...
Properties and Environmental Impact of Stabilized Fly Ash
This paper summarizes the results of two research studies aimed at evaluating the properties and possible environmental effects of bituminous and lignite coal based fly ashes stabilized...
Hydro Rehabilitation?Innovative Solutions
Most hydro facilities have been in operation for many years and, consequently, must periodically have been rehabilitated. The high cost of energy, labor, materials, and financing dictate...
Fly Ash in Roller Compacted Concrete Pavement
This paper presents the state of practice on the use of fly ash in roller compacted concrete (RCC) pavements. Placed using asphalt pavers and compacted using asphalt rollers, RCC pavement...
Superplasticized High-Volume Fly Ash Structural Concrete
This research was carried out to develop structural grade concrete containing high-volumes of ASTM Class C fly ash. A Portland cement concrete, proportioned to have 28-day compressive...
A Computerized Completion
The original designers of the 1.6 million sq ft Fillmore Center in San Francisco (its largest mixed-use development project in 20 years) had specified a large amount of steel reinforcement...
Estimating Geochemical Behavior of Cocnretes to be Placed at Yucca Mountain
The interactions of J-13 water with cementitious materials were examined at 25?C using the geochemical code EQ3NR/EQ6. Results of the modeling suggested the following conclusions: (1)...
Computer-Based Interactive Design for Prestressed Concrete Structures
Prestressed concrete structures can provide a highly desirable solution for many structural applications because the designer gains control over several additional parameters as compared...
Prestressed Concrete Bridge Design and Optimization
The computer program described here analyzes simple span highway bridges for any AASHTO live load, generates girder and slab dead loads, performs the analyses for maximum moments and shears,...
Optimal Design of Reinforced Concrete Structures via Decomposition and a Variety of Search Strategies
This paper presents a strategy where the design of a reinforced concrete structure is not only automated, but optimized. The strategy employs decomposition to subdivide the problem into...
Optimization of RC Frames with Reliability Concepts
Analysis and design optimization are considered simultaneously for reinforced concrete frames. Global displacements were considered as design variables. The nonlinear behavior of the elements...
Computer Modelling of Concrete Cover Effect on the Behavior of Fiber Concrete Subjected to Monotonic Pullout
The objective of this paper is to evaluate the concrete cover effect on the bond behavior of bars embedded in normal and fiber reinforced concrete. Nonlinear finite element analysis is...
Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
Perplexing Issues in Concrete Softening
We explore some of the proposed techniques for modeling 'softening' via the constitutive model. We seek a framework which is both theoretically sound and physically...
Two Dimensional Analysis of Strain Localization with Nonlocal Continuous Damage
This paper addresses the problem of damage localization from a theoretical stand point with a nonlocal model. Conditions for non uniqueness of the rate equations of equilibrium are derived...
Tensile Failure in Concrete by Spallation
Plate impact experiments were performed on concrete specimens to study tensile failure at high strain rates. For tensile stress pulse durations of 1.5 and 2.2 ms the threshold stress for...
Healing or Negative Damage in Concrete
The deformation of concrete may be attributed to damage or the evolution of microcracks and to mechanical healing or the closing of microcracks. For damage, dissipation is positive but...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Hydrodynamics of Deepwater Tension Leg Platforms
A model is presented for investigating the overall quasi-static behavior of tethers, the anchoring elements for a Tension Leg Platform, TLP. Effects of tether weight and curvature, and...
Interaction Between Waves and a Floating Body with Tension Legs
A boundary element method has been solved to the coupling problem of a two-dimensional tension leg platform interacting with a monochromatic wave train. In the boundary element calculation,...
Return to search