Kenetic-theory Approach to the Nevado Del Ruiz 1985 Debris Flow
The Nevado del Ruiz 1985 debris flow was the worst disaster of its kind in this century, killing 22,000 people. By making an idealization of the debris flow material and the flow regime,...
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
An Application of Nonhomogeneous Poisson Process in Sediment Infiltration Into Gravel Bed
The compound homogenous Poisson process (CNHPP) model (Shen & Todorovic, 1971 ) is found applicable in sediment infiltration into gravel bed due to the unsteady and nonuniform...
Riprap Coverage Around Bridge Piers
Experiments were conducted to examine the effect of riprap size and coverage on reducing local scour at bridge piers. Pier diameter, bed material size, riprap size and diameter were varied...
Friction in Debris Flows: Inferences from Large-scale Flume Experiments
A recently constructed flume, 95 m long and 2 m wide, permits systematic experimentation with unsteady, nonuniform flows of poorly sorted geological debris. Preliminary experiments with...
Sediment Deposition from Debris Flow on a Gentle and Wide Slope
Motion of sediment grains in the deposition process from debris flow on a gentle and wide slope was examined. A model of the deposition was presented on the basis of an analysis of grain...
Time-Dependent Landslide Probability Mapping
Case studies where time of failure is known for rainfall-triggered debris flows can be used to estimate the parameters of a hazard model in which the probability of failure is a function...
Ballast Water Treatment Effluent Dispersion Studies
Treated tanker ballast water is discharged form Alyeska Pipeline Service Company's ballast water treatment facility through a multiport diffuser into Port Valdez, Alaska. The discharge...
Shear Connection in Composite Beams
This paper considers the influence of the shape of the deck profile on the shear connection of composite beams. It was found that the existing strength reduction factor can be unconservative...
Thermal Shielding in Continuous Span Composite Slabs
The increasing popularity in Europe of composite slabs with cold-formed steel decking has underscored the need to improve calculation rules for the fire resistance. Existing rules have...
A Simple Finnish Method for the Structural Fire Design of Composite Structures
The structural fire design of composite structures in Finland has previously been based on furnace tests, which are expensive and take too much time to arrange. With the increasing prominence...
Summary Report Design Session
The Tuesday presentations were devoted to design. Eight papers were presented in the morning general session and 17 presentations were made in 4 concurrent evening workshops. Diversity...
Ductility Effects of End Details in Composite Beams
A limit states criterion is described for quantifying the rotation capacity of members in indeterminate structures as a means of classifying ductility of structures during plastic behaviour...
Development of Composite Slab with Truss-Typed Shear Connectors
This paper describes the results of the test on a steel-concrete composite slab with truss-typed shear connectors. This composite slab was recently developed. A series of tests were conducted...
A New Method from China to Determine Load-Carrying Capacity for CFST Members
The most common research method for CFST (concrete-filled steel tubular) members is to study the behaviors of the steel tube and the core concrete separately, then add them together to...
Strength and Stiffness Behavior of Composite Steel Grid Decks
This paper briefly discusses the historical development of composite steel grid decks. The static and fatigue behavior under bending of filled and unfilled steel grid decks (exodermic)...
Influence on Steel Deck on Composite Beam Strength
Results of a recent study were described in which 7 push-out tests and 4 composite beam tests were conducted. The results were consistent with other recent studies reported in the literature,...
Numerical Analysis of Composite Slab Behavior
A new calculation procedure is described which provides an alternative to full-scale testing for composite slabs with ribbed decking used in buildings. This procedure consists of combining...
Strength Deterioration Behavior of Concrete-Filled Steel Tubular Beam-Columns
Cantilever beam-columns of steel square hollow section with or without filled-concrete were tested under constant axial load and alternately repeated horizontal load to investigate the...
Perfobond Rib Connectors for Composite Beams
In this paper, the influence of concrete strength, transverse reinforcement and concrete dowels on the capacity of perfobond rib shear connectors is examined. Perfobond rib connector is...
Return to search