n Values for Shallow Flow in Rough Channels
Manning's friction factor n has been developed from flume data for very shallow open channel flow in a high-gradient channel with large bed material. n values are presented as a function...
Numerical Solution of Transient Closed-Conduit Flow Equations by the Method of Lines Along Characteristics
The method of characteristics has long been considered as a natural technique for solving transient closed-conduit problems. In this paper, by using the concept of the method of lines,...
Laplace Valve Stroking to Control Water Hammer
The method of Laplace valve stroking to control water hammer is presented. Attention is directed to the most frequently encountered of the simple systems: a single pipe originating at...
Sediment Disposal and Transport in Central SF Bay
The relocation of dredged material from navigation channels in the Francisco Bay is crucial to the movement of deep-draft shipping and shallow-draft recreational vessels. The margins of...
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Survival of Atlantic Salmon Smolts Bypassed Through Ice-Log Sluices Determined by the HI-Z Turb'N Tag
The HI-Z Turb'N Tag was used to assess injury and mortality incurred by Atlantic Salmon (Salmo salar) smolts bypassed through ice-log sluiceways at two stations. Both sluiceways were similar...
Regulation of Flow Downstream of Weirs
Reregulation weirs are one means adopted by the Tennessee Valley Authority (TVA) to provide continuous improved minimum flow and wetted area for aquatic life downstream if hydroprojects...
The Influence of Protective Material on Local Scour Dimensions
Protective materials installed around the base of a bridge pier can reduce or prevent local scour. The performance of four materials: grout mats, grout bags, footings, and riprap, are...
Tetrapods as a Scour Countermeasure
Few materials have been studied for their effectiveness in protecting bridge piers and abutments from local scour other than riprap. Recent research conducted at the FHWA research facility...
Mechanics of Debris Flows
The paper deals with the mechanics aspects of the modelling of debris flows and will focus on steady, fully developed flows. After a brief review of the types of constitutive equations...
Kenetic-theory Approach to the Nevado Del Ruiz 1985 Debris Flow
The Nevado del Ruiz 1985 debris flow was the worst disaster of its kind in this century, killing 22,000 people. By making an idealization of the debris flow material and the flow regime,...
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
An Application of Nonhomogeneous Poisson Process in Sediment Infiltration Into Gravel Bed
The compound homogenous Poisson process (CNHPP) model (Shen & Todorovic, 1971 ) is found applicable in sediment infiltration into gravel bed due to the unsteady and nonuniform...
Riprap Coverage Around Bridge Piers
Experiments were conducted to examine the effect of riprap size and coverage on reducing local scour at bridge piers. Pier diameter, bed material size, riprap size and diameter were varied...
Friction in Debris Flows: Inferences from Large-scale Flume Experiments
A recently constructed flume, 95 m long and 2 m wide, permits systematic experimentation with unsteady, nonuniform flows of poorly sorted geological debris. Preliminary experiments with...
Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
Sediment Deposition from Debris Flow on a Gentle and Wide Slope
Motion of sediment grains in the deposition process from debris flow on a gentle and wide slope was examined. A model of the deposition was presented on the basis of an analysis of grain...
Methods for Prediction of Maximum Scour at Coastal Structures
The most common coast scour-related problems are toe scour at rubble mound structures and vertical seawalls, and scour at the base of piles and horizontal pipelines. Existing scour prediction...
Time-Dependent Landslide Probability Mapping
Case studies where time of failure is known for rainfall-triggered debris flows can be used to estimate the parameters of a hazard model in which the probability of failure is a function...
Shear Connection in Composite Beams
This paper considers the influence of the shape of the deck profile on the shear connection of composite beams. It was found that the existing strength reduction factor can be unconservative...
Return to search