A Mobile Robot for Reconnaissance of HAZMAT Incident Sites
First entry into situations where hazardous materials have been accidentally spilled or released is extremely dangerous. Often the type of material, its exact location, and the extent...
Environmental Hardening of a Mobile-Manipulator System for Nuclear Environments
The research report involves the radiation hardening of a commercially-available, mobile robot, the REMOTEC ANDROS. This hardening effort will culminate in the availability of a mega-rad...
An Overview of the Accident Response Mobile Manipulation System (ARMMS)
The development of a high mobility platform integrated with high strength manipulation is under development at Sandia National Laboratories. The mobility platform used is a High Mobility...
Robotic Workcell for Waste Handling
During the sorting and repackaging of recovered waste, robotic systems for grasping and manipulating odd-shaped objects of varying sizes will be needed. Also, during the removal of buried...
Advancement of Material Handling Technologies for In-Place Asphalt Pavement Recycling
New technologies for asphalt pavement resurfacing are improving dramatically with the advancements being made to related equipment technologies. This paper focuses on the recent developments...
Real-Time Control for a Robotic Rebar Bender
Job conditions and variability in the properties of the stock material combine in a rebar bending operation to create a challenging environment for a robotic bender. This paper reports...
Bubba, A Teleoperated Countermine Vehicle
A recent countermine test program required the development of Bubba, a 5 ton, 6 wheel drive, M-923 military truck converted to teleoperation. The Mine Detection by Energetic Photons (MIDEP)...
The Engineer Vehicle Tele-operation Capability
The Tank-Automotive Robotics Office develops remote and autonomous ground vehicle systems for the U.S. Army. We specialize in command and control of mobility platforms and overall system...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Dynamics of Laminated Plates with Layer Waviness
Composite structures usually exhibit a high strength-to-weight ratio as compared to traditional structural materials. This makes them attractive solutions in many aerospace applications....
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Nonlinear Analysis of Stiffened Laminated Cylindrical Shells Using the Layerwise Theory of Reddy
The layerwise shell theory of Reddy is used to develop the buckling and the postbuckling equations of circular cylindrical shells reinforced by means of axial and ring stiffeners and subject...
Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...
A Membrane Structure for a Lunar Assembly Building
This paper describes potential design options and construction approaches for the development of an inflatable membrane structure of non-circular cross section. This structure could be...
A New Airlock Approach for Human Exploration
Conceptual design work on the First Lunar Outpost (FLO) mission led to the development of an airlock concept called the `doorlock' which appears quite promising for all aspects of manned...
Analysis of Inflating Habitable Space Structures with neomass (near-Earth-object mass)
The discovery of near Earth objects (NEOs), during August 1992, and that one of them is a dormant comet, dramatically changed the potential availability of near-Earth resources. NEOs provide...
Inelastic Response of Metal Matrix Composite Tubes
An analytical method which exactly satisfies the equations of the boundary value problem for the inelastic response of laminated metal matrix composite tubes on a point-wise basis is presented....
Mechanics of Curved Fiber Bundles in Composites
Fiber undulations are inherent to manufacturing processes like braiding and filament-winding, and sometimes occur as defects in other composite structures. This paper summarizes the status...
Behavior of Bolted Joints in 3-D Braided Composites
As composites are used more as replacements for metals in space structures, the question arises as to the most efficient way to join the components. Mechanical fasteners are a common joining...
Hygrothermal Effects in Composite Sandwich Panels
The macromechanical analysis of a composite panel with laminate facings and a honeycomb core is carried out by taking into account mechanical and hygrothermal loads. In this analysis the...
Return to search