Case Study in the Upgrade and Rehabilitation Techniques of a Pumped Storage Installation
This paper presents a specific case study in the runner upgrade and unit rehabilitation of two pump/turbines at the Seneca Powerhouse. The study addresses the modern optimized designs...
Hydraulic Weighing Lysimeter Measurement Errors
A prototype size lysimeter was studied in the laboratory to determine accuracy and sources of error that might be caused by variable pillow contact area, temperature changes in various...
Field Experience with Hydraulic Weighing Lysimeters
Hydraulic weighing lysimeters can be a reliable and relatively inexpensive source of actual crop evapotranspiration (ET) data for field water use studies and crop coefficient development....
Use of Lysimetric Measurements for Designing Major Irrigation Systems in the USSR
The bioclimatic method for calculation of crop water requirements has been widely used in the USSR in recent years. The author has analyzed the results of its application for designing...
Design and Management of Drip Systems in Hawaii
In 1970, Hawaii's sugar industry began implementing drip irrigation to minimize labor requirements, improve water and nutrient application efficiencies, and maximize yields....
Evaluation of Thermoplastic Drainage Pipe Designs in Europe and North America
The last 10 years have seen significant increase in the use of plastic pipe for drainage systems in North America in comparison to Europe. Many plastic pipe products have included corrugations,...
Hydrologic Impact of Reservoir Filling on a Fractured Crystalline-Rock Aquifer
A study of flow in and recharge to fractured rock has been initiated in conjunction with the construction and filling of a pumped-storage reservoir for a hydropower plant in the Blue Ridge...
Canal Model Evaluation and Comparison Criteria
The ASCE Task Committee on 'Irrigation Canal System Hydraulic Modeling' was formed to evaluate existing canal unsteady flow models (computer programs) and to...
Description and Evaluation of Program CANAL
CANAL was developed in 1987 at Utah State University to perform hydrodynamic computer simulations of canal networks. This paper describes the model and offers opinions on the model's...
Description and Evaluation of Program: DUFLOW
DUFLOW is a micro-computer software package for simulating one-dimensional unsteady flow in open channel systems. It is designed for simple networks of channels with simple structures....
Description and Evaluation of Program: USM
USM was developed by the USBR for simulating unsteady flow conditions in canals with either manual or automatic gate operation. This paper describes the model and discusses the relative...
Description and Evaluation of Program: CARIMA
The CARIMA code simulates unsteady free-surface flow in simple or multiply connected systems of rivers or canals. The simulation uses the Preissmann implicit finite-difference method for...
A Study of a Flood Control Levee Swamp System
In an attempt to reconstruct the events of the more than 100-year 1987 New Year's Eve storm that occurred on Oahu, Hawaii, an analysis of a complicated overland flow phenomenon...
Cal Poly Model Canal
The Cal Poly Model Canal (located at the Water Delivery Facility, Irrigation Training and Research Center, California Polytechnic State University, San Luis Obispo, CA) was built to accommodate...
Field Application of Transient and Steady-State Canal Models in Thailand
A transient (unsteady) flow model for simulating the hydraulics in irrigation canal networks was developed and tested in Thailand. A steady-state hydraulic model was subsequently developed...
Future Needs for Unsteady Flow Canal Models
The ASCE task committee on 'Irrigation Canal System Hydraulic Modeling' examined a number of the computer programs available for simulating unsteady open-channel...
Irrigation Delivery Design with Parameter and Objective Uncertainty
This paper investigates the effects of uncertainty in the design of hydraulic structures in an open-channel system for irrigation water delivery. Uncertainty due to ambiguity in the values...
Predicting Incipient Fluidization of Fine Sands in Unbounded Domains
Fluidization systems in the coastal environment consist of a water pumping system and a source pipe buried in or near a tidal inlet to maintain a channel or to aid in sand bypassing. If...
Measurement and Analysis of Hydraulic Conductivity Variability of a Heterogeneous Aquifer
The spatial variability of hydraulic conductivity of a shallow alluvial aquifer was investigated using borehole flowmeter measurements. The study was conducted at the site of a large-scale...
Type Curves for a Slug Test in an Infinitely or Semi-infinitely Thick Aquifer
Type curves are provided for a slug test in an infinitely or semi-infinitely thick aquifer, the latter with the single confining layer immediately above or immediately below the well....
Return to search