A Lagrangian Model for Surface Buoyant Jets
A model is developed to predict the trajectory of a surface buoyant discharge into a large receiving water body. A Lagrangian approach is used to trace the path of a `control volume' of...
Improved Hydraulic Features of the HEC River Analysis (HEC-RAS)
The Hydrologic Engineering Center (HEC) is in the process of developing a Next Generation (NexGen) of hydrologic engineering software. The goal in the area of river hydraulics is to develop...
MAC3D: Multiblock Numerical Model for Hydraulic Applications
The MAC3D computer code is a three-dimensional numerical model for incompressible flow. To enhance geometric flexibility, it uses multiblock grids, which are composite structured grids...
Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Verification of a Three-Dimensional Model of Delaware Bay
A three-dimensional numerical hydrodynamic model of Delaware Bay is being developed to assess the impact of deepening the navigation channel from near the mouth of Delaware Bay to the...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...
A Three-Dimensional Numerical Simulation of Seasonal Flow and Salt Transport in the C&D Canal
Two seasonal-scale, three-dimensional hydrodynamic models with salt transport using CH3D-WES were constructed to represent the most critical periods of environmental concern: fishery spawning...
Climatic Perspective on the 1993 Mississippi R. Flood
The 1993 summer flooding in the Upper Mississippi River Basin was the most devastating flood of modern times with damage estimates in the range of 15-20 billion dollars. The paper describes...
1993 Mississippi Record Stages and Levee Failures
Record-setting stages, flooding duration, and multiple levee failures are distinguishing features of the Mississippi River 1993 flood. The peak stages reached at stations along the Illinois...
Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...
Bias in Regression Estimates of Manning's n
Selected equations for estimating roughness for gravel-bed streams were tested using a composite data set containing much of the data used to define the equations. All equations tested...
Analysis of Levee Design in a Mountain River Using Two-Dimensional Flow Modeling
The South Branch of the Potomac River experienced extreme flooding in November 1985. A flood with an estimated return period of 400 years caused $33 million in damage in Petersburg, West...
Boundary Conditions and Flow Patterns in a Mountain River
Flood flow patterns in mountain valleys may be influenced by longitudinal variations in channel and valley morphology and by temporal variations in boundary conditions. This study utilizes...
Some Benefits of Grid by Number Sampling
Describing the overall sediment composition of gravel-bed river reaches and depositional bars is a difficult problem due to spatial variations in the sediment size. Past research has focused...
Coarse Sediment Transport and the Maintenance of Fish Habitat in the Upper Colorado River
An analysis of the relation between discharge and boundary shear stress is presented for an alluvial reach of the Colorado River near Grand Junction, CO. The analysis indicates that the...
Palaeohydraulic reconstruction of floods in upland UK bedrock streams: progress, problems and prospects
Palaeoflood evidence from five small upland Pennine catchments in the UK is used with the HEC-2 flow routine to simulate Holocene peak discharges. Even allowing for uncertainty, sensitivity...
Streamflow Related to Channel Geometry in Northern New England
Channel geometry measurements can be used to estimate various streamflow characteristics at ungaged stream locations. Channel cross section dimensions and sediment size distributions were...
Return to search