Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...
Treatment of Nonhomogeneous Terms in Flow Models
A study of the relative significance and treatment of nonhomogeneous terms in unsteady open-channel flow simulation models has been conducted. The effects of nonhomogeneous terms including...
Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...
Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...
Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...
Verification of a Three-Dimensional Model of Delaware Bay
A three-dimensional numerical hydrodynamic model of Delaware Bay is being developed to assess the impact of deepening the navigation channel from near the mouth of Delaware Bay to the...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...
A Three-Dimensional Numerical Simulation of Seasonal Flow and Salt Transport in the C&D Canal
Two seasonal-scale, three-dimensional hydrodynamic models with salt transport using CH3D-WES were constructed to represent the most critical periods of environmental concern: fishery spawning...
Impacts of the 1993 Flood on the Mississippi River in Illinois
The 1993 flood has now been recognized as one of the greatest floods on the Mississippi and Missouri Rivers. Its geographical extent included portions of Iowa, Missouri, Illinois, Wisconsin,...
Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...
Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...
Bed Load Roughness in Supercritical Flow
A supercritical concrete channel has been proposed for Mission Creek located in Santa Barbara County, California. The proposed channel could transport gravels and cobbles as bed load during...
A Study on Mathematical Model for Sediment Yield in Mountain Regions with Large Hillside Slopes
Based on the characteristics of water and soil loss in mountain region with large hillside slopes in southwest of China, the equations of runoff formation and sediment yield are obtained....
Analysis of Levee Design in a Mountain River Using Two-Dimensional Flow Modeling
The South Branch of the Potomac River experienced extreme flooding in November 1985. A flood with an estimated return period of 400 years caused $33 million in damage in Petersburg, West...
On Habitat Simulation in Mountain Rivers
Mountain rivers are quite different from other rivers and one of the characteristics that distinguish them from others is the large variation in velocities with time, with location in...
Numerical Model Verification on Tidal Current in Tokyo Bay
Results of a research project to verify the Multiple Level Model for a tidal current analysis in Tokyo Bay are presented in this paper. This study is a part of the subject for the Task...
Return to search