Fatigue Damage for Reinforced Concrete Offshore Structures
When concrete structures are subjected to fatigue loading - resulting from ice or wave loads - progressive damage occurs with increasing number of cycles. Nonlinear damage evolution equation...

Low Friction and Adfreeze Coatings
Low friction and adfreeze coatings have proven to be cost effective in reducing skin friction on icebreaker hulls. Of the two coatings acceptable for this service, the 100% polyurethanes...

Wave Runup Around Conical Structures
A variety of conical structures have been proposed for use in the Arctic environment, primarily because the inclined surface of such a structure gives rise to reduced ice loads associated...

Design and Model Testing of an Arctic Seawater Intake for Sedimentation and Wave Effects
A seawater intake structure is being designed to provide flood water for tertiary recovery of oil from the Kuparuk oil field near Prudhoe Bay, Alaska. A wave effects study establishes...

Strudel Scour: An Arctic Seafloor Scouring Process
Strudel scour is an arctic phenomenon which occurs every spring when the fresh-water rivers melt and inundate the sea ice cover of the arctic sea. This fresh water flowing out over the...

Technical Considerations for Beaufort Sea Pipelines
The development of Beaufort Sea fields requires construction methods and equipment for pipeline installation and trenching providing a balance between safety, reliability, and economy....

Overview of Soil and Engineering Geologic Conditions in the Beaufort, Chukchi, and Bering Seas
General soil and engineering geologic conditions that are likely to affect exploratory drilling and development activities in six Alaska OCS lease sale areas are discussed. Important conditions...

Strength-Deformation Properties of Arctic Silt
Hydrocarbon exploration and production activities in the Beaufort Sea require construction of gravity structures capable of withstanding extremely large ice loads at sites where the subsea...

Undrained Cyclic Behaviour of Beaufort Sea Silt
Cyclic loading behaviour of Beaufort Sea silt has been studied under triaxial conditions, with and without static shear stress, to define the resistance to liquefaction or cyclic straining...

Analysis of Liquefaction Potential of Hydraulically Placed Subsea Berms
The use of hydraulically placed sand for the construction of artificial islands for hydrocarbon exploration in the Beaufort Sea has necessitated detailed geotechnical evaluations of their...

Arctic Oil Spills in Relationship to Sea Ice Motion
Sea ice on a scale of a few kilometers must be treated as a granular material rather than a continuum. The floes are in nearly constant motion relative to a fixed frame and each other....

An HF CODAR Doppler Transponder System
Gulf Oil Exploration and Production Company completed two major phases in the development of a high frequency (HF) CODAR Doppler transponder system for measuring sea ice motion. The system...

Constitutive Equations for Ice as a Damaging Material
Constitutive equations for ice subjected to uniaxial compression are developed based on applications of the theory of continuous damage mechanics. A physical model of ice deformation response...

Fracture Theory for Nonhomogeneous Brittle Materials with Application to Ice
Brittle heterogeneous materials generally fracture with a dispersed zone of microcracking at the fracture front. The deformation and failure of these materials can be described by a nonlocal...

Sea Ice Indentation Accounting for Strain-Rate Variation
Two levels of ice loading are typically considered in the design of drilling and production platforms for the Arctic. Global ice pressures govern the overall structural geometry and dimensions...

Ice Load Prediction with the Use of a Rate-Dependent Anisotropic Constitutive Law
Man-made structures built in arctic offshore areas are subject to ice loads. Traditional methods for estimating ice loads rely on an indentation factor from rigid-plasticity, an empirical...

Spalling and Buckling of Ice Sheets
The effect of local eccentricity in the vertical direction on the magnitude of compressive strength of wide ice sheets is studied theoretically. Two new failure modes are identified: indentation...

Validation of the CICE Code for Ice Ride-Up and Ice Ridge Cone Interaction
The discrete element method is capable of analyzing multiple, interacting, deformable, discontinuous or fractured bodies undergoing large motions and rotations. The formulation solves...

Deep Water Bering Sea Development Concepts
A brief description of the major environmental factors that a structure used to produce oil and gas in the deep water Bering Sea would have to cope with is presented. In particular, the...

Geotechnical Characteristics of Seafloor Sediments: Norton Sound, Alaska
During the past few years the USGS has been conducting studies in the northern Bering Sea aimed at identifying geologic and environmental conditions that may be hazardous to offshore resource...

 

 

 

 

Return to search