Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...
Possibilities and Problems of Latticed Structures
Several fundamental aspects of space frames which are sometimes referred to as latticed structures are discussed. Terminology of the structural system is first considered. Special features...
Project Case Study: Space Frame Roof Structure, Main Stadium, Shah Alam Sport Complex, Selangor, Malaysia
In the city of Shah Alam located just outside of Kuala Lumpur, the Shah Alam Sport Complex is built as a multi-use sports facility. The aim of this study is to discuss the management of...
Structural Tests on the Suspen-Dome System
The 'suspen-dome' system, which the authors have developed, consists of a single-layer truss dome and a cable structure. The present paper deals with the results of structural tests conducted...
Design of Low Rise Dome for the University of Hawaii at Manoa
The 97.5m span dome covering the new multipurpose sports arena at the University of Hawaii in Manoa is a spherical, triangulated dome structure with a rise of 16.2m. In addition to the...
Analysis and Design of a Double Layer Barrel Vault with a Large Span
The roof of coal storage in JiaXin Power Station is a double-layer barrel vault. This roof covers span of 103.5 M and a longitudinal span of 88.0 M. The height of this space truss is 3.5...
Structural Integrity of Space Trusses
Space trusses of the double layer grid configuration can experience rapid propagation of failure in the ultimate load condition and thus are potentially vulnerable to progressive collapse...
Optimization of Space Lattice Structures with Multimodal Frequency Constraints
The paper presents an optimization algorithm for the design of space trusses subjected to constant value constraint. The goal of the optimization is a structure of the highest multiple...
Optimal Design Conception of Grid Domes in Practice
In this paper, the optimal design conception of grid domes in practice is presented. The classical dome shell structures covering some irregular boundaries often seems not to be satisfied...
Explorations in Geodesic Forms
Geodesic forms constitute an important family of structural systems. The objective of the paper is to show how the concepts of a mathematical tool called formex algebra and its programming...
Discrete Field Stability Analysis of X-Braced Lattices
The three-dimensional X-braced lattice is used as a compression member in structures ranging from the long span roof of buildings to radio and television antennas. In such cases the design...
Simulation Procedure for Buckling Behaviors of a Reticular Dome
Complex behaviors of the ball-joint connection, especially used in steel space structures, are expressed in the numerical model to confirm the estimative ability of such a model by comparing...
Effect of Joint Rigidity on Buckling Strength of Single Layer Lattice Domes
The present paper discusses the effect of the joint rigidity on the buckling strength of single layer lattice domes, with regular three way grids, under vertical loading. The effect of...
Large Deformation Analysis of Lattice Truss Structures Including Hysteretic Material Behavior
A methodology is presented to analyze lattice truss structures including both material and geometric nonlinearities. Modeled member material behavior modes include: buckling, yielding,...
Buckling of Single Layer Latticed Dome under Uniform Gravity Load
This paper reports on experiment and numerical analysis relating the buckling of a single layer latticed dome under uniformly distributed nodal gravity load at the dome central portion....
Collapse Behavior of Double-Layer Space Truss Grids with Member Buckling
The results of collapse tests of over twenty space truss grids with elastic buckling of members are reviewed. The space truss grids include three types, that is, square-on-square, square-on-diagonal...
Ultimate Loading Capacity of Braced Domes
The stability behaviors of a practical latticed dome with 40 metres span are studied in this paper. The geometric and material nonlinear behaviors, as well as the effects of the initial...
Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...
The Georgia Dome and Beyond: Achieving Lightweight - Longspan Structures
In the last two decades, the development of longspan roof structures has undergone a quantum leap. The introduction of steel structures, fabric structures, Bucky Fuller's tensegrity structure,...
Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...
Return to search