ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Regulatory Views on Seismic and Fault-Displacement Parameters Needed for a Geologic Repository Design
This paper presents the regulatory views of the U.S. Nuclear Regulatory Commission staff on some of the significant issues related to the seismic and faulting design of a geologic repository....

An Overview of Analysis and Regulatory Needs to Determine Seismic Loads for Design of a High-Level Waste Geologic Repository
Determination of seismic loads and faulting hazard for siting, design and performance evaluation of a high-level nuclear waste repository facility can be accomplished with state-of-knowledge...

Performance Goal Based Seismic Design Criteria for High Level Waste Repository Facilities
This paper proposes a set of deterministic seismic design and evaluation criteria based upon a specified probabilistic seismic performance goal for High Level Waste Repository (HLWR) facilities....

Probabilistic Analysis of Faulting Associated with Earthquakes for Nuclear Waste Repositories
The probabilistic analysis of seismogenic faulting follows the same general methodology as the more common seismic hazard analysis for shaking. The main difference lies in the influence...

Tectonic Characterization of a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Tectonic characterization of a potential high-level nuclear waste repository at Yucca Mountain, Nevada, is needed to assess seismic and possible volcanic hazards that could affect the...

Probabilistic Seismic Design Considerations for a High-Level Nuclear Waste Repository
Earthquakes in the vicinity of an underground high-level waste (HLW) repository have potential effects that must be estimated during the design of the facility. The production facilities...

Current Plans to Characterize the Design Basis Ground Motion at the Yucca Mountain, Nevada Site
A site at Yucca Mountain Nevada is currently being studied to assess its suitability as a potential host site for the nation's first commercial high level waste repository. The DOE has...

Estimation of Near-Regional Seismic Ground Motion from Underground Nuclear Explosion Tests
A problem unique to the location of a nuclear waste repository adjacent to the Nevada Test Site is the assessment of seismic ground motion from potential underground nuclear explosion...

Design of Underground Repository Openings in Hard Rock to Accommodate Vibratory Ground Motions
A methodology and preliminary application for designing repository openings to withstand vibratory ground motions is presented. The methodology first establishes the design basis ground...

Block Dynamics Modeling in Support of Seismic Design
The behavior of an underground excavation is usually characterized by stresses and displacements which develop around the excavation as a result of prevailing field conditions. For conventional...

Seismic Design of Circular-Section Concrete-Lined Underground Openings?Preclosure Performance Considerations for the Yucca Mountain Site
Yucca Mountain, the potential site of a repository for high-level radioactive waste, is situated in a region of natural and man-made seismicity. Underground openings excavated at this...

Seismic Considerations in Sealing a Potential High-Level Radioactive Waste Repository
The potential repository system is intended to isolate high-level radioactive waste at Yucca Mountain according to the performance objective - 10 CFR 60.112. One subsystem that may contribute...

Optimal Cost Basis for Seismic Design
The paper summarizes a methodology for establishing seismic design levels based on a cost-benefit assessment. The methodology requires the development of costs and benefits for varying...

Guidelines for the Development of Natural Phenomena Hazards Design Criteria for Surface Facilities
This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear...

A Natural Cleanup
For almost 30 years, nonvolatile petroleum hydrocarbons from used motor oil, diesel, gasoline and other automotive fluids had been released to an oil sum at a truck-maintenance facility...

Fast Foundation for Soft Clay
This article describes the detailed foundation work and high-capacity piling design for a flue gas desulfurization (FGD) retrofit system for the Lambton Generation Station in Ontario,...

Banking on a Bridge
Completing the geotechnical design for the approach embankments and foundations for the Charter Oak Bridge, which crosses the Connecticut River between Hartford and East Hartford, Conn.,...

Seismic Design Criteria for Transporation Structures
Presented is a discussion focusing on two critical issues which must be resolved when setting seismic design criteria for important transportation structures such as those supporting elevated...

Wind Engineering?Engineering for Wind Damage Mitigation
The establishment in 1970 of a new engineering discipline, wind engineering, was motivated by property damage caused by windstorms of 1970 known as the Lubbock Tornado and Hurricane Celia....

Controlling the Seismic Behavior of Precast Concrete
Precast concrete has, through the years the years, acquired a bad reputation insofar as its ability to withstand earthquake is concerned. This reputation, though reasonably based, is not...

 

 

 

 

Return to search