Recent Trends and Advances in Bulk Cargo Unloading
The progress in loading of bulk cargo into ships has matched the advances in ships' size. The same could not be said for getting bulk material out of the hold of a ship, in...
Design and Construction of Marine Facilities for Ridley Island Coal Terminal
The design and construction of the wharf for 250,000 DWT bulk carriers is discussed in this paper. The terminal project was carried out on fast-track, 23 month schedule, with construction...
Lessons Learned from the Certification of Graving Docks, Marine Railways, Vertical Lifts and Shipbuilding Ways
Because of the hazards which exist during the ship docking, undocking, launching and while the ship is being built or repaired, the Navy has determined a requirement exists for system...
Report of Task Committee on Drydock Design Criteria
This paper briefly summarizes the work carried out by a Task Committee on Drydock Design Criteria which was established by the Committee on Ports and Harbors. The Committee was established...
Ship Wave Prediction for Port and Channel Design
Several laboratory and field investigations of ship-generated waves have been conducted during the past twenty-five years. Typically, for a given ship, reported data consists of the height...
Navigation Channel Design for Safe and Efficient Ship Transit
The U. S. Army Engineer Waterways Experiment Station (WES) recently conducted a hydraulic model investigation of the western portion of Cleveland Harbor, Ohio. This study provided data...
Los Angeles and Long Beach Harbors Tidal Circulation Study
Expansion of harbor facilities frequently involves placement of additional landfill and the deepening of channels and mooring areas. A numerical tidal circulation model was used in the...
Louisiana Avenue Wharf E: Rehabilitate the Existing Wharf into a Container Terminal
The Port of New Orleans is currently modernizing the existing facilities in order to handle the containerized cargos, therefore enabling it to compete with other ports located on the Gulf...
National Port Issues
The adequacy of U. S. ports to meet the Nation's present and future needs was evaluated by a Committee of the Marine Board, National Research Council. The changing character...
Lifeline Seismic Risk Analysis?Case Studies
These papers employ design concepts and procedures in lifeline seismic risk analysis. Two of the papers describe the seismic hazards in the northwestern United States. A systems model...
Chloramines: A Better Way?
Chlorination of drinking water has been linked to the formation of carcinogenic trihalomethanes (THMs). By adding ammonia to the water, the chlorine becomes chloramines which don't...
Tallying Water Resources Goals
Federal water resources planning philosophy has undergone a lengthy evolution with a number of refinements in the past decade to encompass environmental laws and the political philosophy...
Treating Sewage in One Tank
A sequencing batch reactor (SBR) was the answer to a sewage problem that was holding up community development in Poolesville, MD. Poolesville was one of the first municipalities in the...
Drying Out
Treatment plants are most efficient when they're treating waste, not water. Spurred on by increased fuel prices, a number of new technologies have been developed that can...
Bugs and Carbon Make a PACT
At its Chambers Works in southern New Jersey, DuPont was ordered to sharply reduce the BOD load in the wastewater it discharged to the Delaware River. Out of this mandate came the PACT...
Physics-Based Modeling of Lakes, Reservoirs, and Impoundments
This book provides an overview of considerations that apply to modeling flow and transport in lakes, reservoirs, and impoundments using equations based on conservation principles. Specific...
Liquefaction Study of Coal Refuse by Nuclear Gauges
This paper presents a technique for utilizing nuclear gauges to determine density and moisture content continuously throughout refuse embankments and slurry reservoirs. The nuclear measurements...
Pore Pressure Effects in Borehole Shear Testing
The effects of excess pore pressures on shear strength results obtained using the Borehole Shear Test (BST) were investigated. Pore pressures were measured during the consolidation, shear,...
High Quality Sampling and In Situ Testing for Deep Water Geotechnical Site Investigation
This paper discusses methods that have been used to conduct geotechnical investigations in water depths up to 2500 feet. Investigations can be conducted from supply boats, geotechnical...
In Situ Measurement of Permeability in Soft Clays
As part of an extensive field programme, the magnitude of errors due to clay remoulding and filter clogging in tests performed in common piezometers is evidenced. Comparisons between variable...
Return to search