Experimental Investigation of Self-Tapping Fasteners for Attachment of Corrugated Cladding Panels to Pultruded Fiber-Reinforced Plastics Beams in Industrial Building Construction
This paper describes an experimental investigation of self-tapping fasteners for the attachment of corrugated fiber-reinforced plastics (FRP) cladding panels to pultruded FRP beams. Although...
Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...
Glass-Fiber Reinforcing Rod: Characterization and Application to Concrete Structures and Grouted Anchors
This paper presents the physical and mechanical characteristics of a new glass-fiber reinforcing rod which was developed to be used as a rebar for concrete structures or a tendon for grouted...
Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...
Splice/Development Length Requirements for FRP Grids Used in the Structural Reinforcement of Concrete
The research presented in this paper program was directed towards determining development length and splice requirements for FRP grids used in the reinforcement of concrete structures....
Feasibility of FRP Molded Grating-Concrete Composites for One-Way Slab Systems
This paper describes the behavior of one-way concrete slabs reinforced with Fiberglass Reinforced Plastic (FRP) molded grating. FRP molded grating is commercially available and is mainly...
Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Nonprestressed and Prestressed FRP Sheets as External Reinforcement of Wood Members
The paper presents a summary of an analytical and experimental investigation of a new form of wood construction involving external bonding of thin fiber reinforced plastic (FRP) sheets...
Sprayed-Zinc Galvanic Anodes for the Cathodic Protection of Reinforcing Steel in Concrete
Corrosion of reinforcing steel bars (rebars), due to penetration of chloride ions from seawater affects the substructure of many bridges in marine service. In a new, low cost control method,...
Turning on the Waterworks
A new tunnel, two pumping stations, reservoirs and 150 mi of pipe have 23 municipalities in DuPage County, Illinois awash in Lake Michigan water, ahead of schedule and under budget. Bringing...
A Face-Lift for Lincoln
The 45-year-old Lincoln Tunnel is undergoing a sweeping rehab�from its ceiling on down to its roadway. Each of the three tubes (in the world's only three-tube underwater vehicular...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Simplified Methods for Assessment of the Structural Integrity of Existing Steel Jacket Platforms in the Gulf of Mexico
This paper presents the results of research to define a practical procedure for assessment of the structural integrity of existing steel jacket platforms in the Gulf of Mexico. An overview...
Review of API Guidelines for Pipe Piles in Sand
Most offshore structures are supported using steel pipe piles which are designed in accord with API Recommended Practice 2A. The guidelines for analysis of axial capacity of steel pipe...
Homopolar Pulse Butt Welding of API 5L Line Pipe
Homopolar pulse welding (HPW) is a welding process that is being investigated as a means to rapidly join API line pipe, having particularly great potential for application in deepwater...
Fiber Ropes for Ocean Engineering in the 21st Century
Recent advances in synthetic fiber ropes will greatly influence the practice of civil engineering in the oceans during the 21st Century. New fibers have moduli almost as high as steel...
Smart Structures
Detecting cracks in concrete before they become visible could help prevent structural collapse of buildings and other civil works, say professors at three schools of engineering. The University...
Return to search