Three-Dimensional Simulation of Two-Fluid Movement in Porous Media Using the Boundary Element Method
The paper discusses three-dimensional problems that include a denser fluid overlain by water in an unconfined aquifer. The two fluid regions are bounded by two-dimensional surfaces, including...
Tidal Modelling on IBM Microcomputers
The finite element code, QUIET, for the simulation of two-dimensional shallow water flow has been adapted from its mainframe form for use on the IBM PC, PC/XT, or AT. The model uses of...
Finite Element Analysis of Recirculating Flows
The primitive variable and stream-function-vorticity forms of depth averaged viscous fluid flow equations are compared via finite element computations on problems with the same meshes...
Explicit Finite Element Model for Long Water Waves
An explicit finite element model for free-surface flow is presented. The model is capable of simulating long waves of various orders of approximation in one and two space dimensions. The...
Role of Small Computers in Two-Dimensional Flow Modeling
This paper describes the computational aspects and computer usage history of numerical simulations of horizontal, free surface, steady or unsteady two-dimensional flow fields. The focus...
Joint Flexibility in Steel Frames
This paper investigates the effects of connection flexibility and panel zone deformation on the behavior of plane steel frames. The incorporation of these factors in frame analysis will...
An In-Plane Finite Element Model for Brick Masonry
A finite element model for brick masonry is reported. The model takes account of non linear deformations and progressive local failure. The failure may occur in the joints alone or in...
Nonlinear Macroscopic Finite Element Model for Masonry Walls
A macroscopic finite element model which includes both transverse shear effects and nonlinearity due to cracking has been developed for masonry. These features are accommodated using a...
Behavior of Cavity Masonry Walls Under Out-of-Plane Lateral Loading: An Analytical Approach
In this paper, a finite element model is used to analyze cavity walls in an attempt to understand their complex behavior and to evaluate the adequacy of the assumptions embodied in the...
Shear Stresses in Composite Masonry Walls
The behavior of composite masonry walls subjected to inplane loads is a subject that has received little attention during the last few years. The small amount of experimental and analytical...
Continuum Modeling of Periodic Truss Structures
Procedures for deriving equivalent stiffnesses for an extended Timoshenko beam used to represent truss beams are presented. A typical substructure of a truss is used to calculate these...
Design and Construction of Terror Lake Dam
Terror Lake Dam is a central feature of the 189 million Terror Lake Hydroelectric Project, located on Kodiak Island Alaska. The dam is a 193-feet (59 m) high concrete-faced zoned rockfill...
Computing in Civil Engineering
A broad spectrum of computer applications in civil engineering is covered in 73 papers presented at the Third Conference on Computing in Civil Engineering. Emphasis is on microcompters...
Integrated Testing and Analysis
This paper represents a new approach which greatly streamlines the entire process. In those cases where finite element modeling is used without test verification, the procedure consists...
Analytical Solution of Cable Tray Hanger 3D Structural Interaction under Seismic Loading
Structural design of cable tray hangers is controlled by the Nuclear Regulatory Commission's stringent requirements of seismic analysis. A finite element space frame model...
Transient Fluid-Structure Interaction of a Cylindrical Tank with a Flexible Baseplate
Analytically predicted coupled natural frequencies, response functions, and transient responses are compared with measured values for a partially filled cylindrical tank subject to excitation...
Fluid Structure Interaction Analysis of a Concrete Suppression Chamber of Mark I Containment System
Recent studies have demonstrated that the interaction between a structure and fluid can have a significant influence on the response of the overall system when subjected to certain dynamic...
Determination of Containment Vessel Ultimate Capacity Using Nonlinear Finite Element Analysis
Analysis of steel containment vessels is normally performed using linear elastic solutions with allowable stresses specified by applicable design codes. This method gives little indication...
Safety Investigations of Existing Spent Fuel Storage Structures for Increased Spent Fuel Storage Capacity
Delays in the solution of disposal problems continue to create the need for additional on-site spent fuel storage capacity at commercial nuclear power generating facilities. Rod consolidation...
ACI 349 Embedments: Code Provisions and Methods of Analysis
Steel embedments form the critical link between steel and concrete structures. Appendix B of ACT 349, Code Requirements for Nuclear Safety Related Concrete Structures, specifies the ultimate...
Return to search