Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Analysis of Vessel and Vehicle Queues at Moveable Bridges
This paper describes procedures and the analysis developed to evaluate three different replacement options for the existing S.E. 17th Street Causeway moveable bridge which crosses the...
Estimating Load Impacts on Highway Structures Using the National Bridge Inventory Database
The issuance of single and multiple permits to operate vehicles exceeding legal weight limits, along with the policy-level analysis of bridge impacts induced by changes in vehicle size...
An Integrated System for Evaluation, Rating and Management of Bridges
This paper describes a software system that can effectively be used in bridge management and planning. The system integrates several modules each capable of conducting a specific task...
Regulatory Views on Seismic and Fault-Displacement Parameters Needed for a Geologic Repository Design
This paper presents the regulatory views of the U.S. Nuclear Regulatory Commission staff on some of the significant issues related to the seismic and faulting design of a geologic repository....
An Overview of Analysis and Regulatory Needs to Determine Seismic Loads for Design of a High-Level Waste Geologic Repository
Determination of seismic loads and faulting hazard for siting, design and performance evaluation of a high-level nuclear waste repository facility can be accomplished with state-of-knowledge...
Performance Goal Based Seismic Design Criteria for High Level Waste Repository Facilities
This paper proposes a set of deterministic seismic design and evaluation criteria based upon a specified probabilistic seismic performance goal for High Level Waste Repository (HLWR) facilities....
Probabilistic Analysis of Faulting Associated with Earthquakes for Nuclear Waste Repositories
The probabilistic analysis of seismogenic faulting follows the same general methodology as the more common seismic hazard analysis for shaking. The main difference lies in the influence...
Tectonic Characterization of a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Tectonic characterization of a potential high-level nuclear waste repository at Yucca Mountain, Nevada, is needed to assess seismic and possible volcanic hazards that could affect the...
Geometric Models of Faulting at Yucca Mountain
Yucca Mountain, Nevada, is currently being studied as a potential site for a geologic repository of high-level radioactive waste. Alternative conceptual tectonic models are expected to...
Preliminary Report: The Little Skull Mountain Earthquake, June 29, 1992
The Little Skull Mountain earthquake occurred about 20 km from the potential high level nuclear repository at Yucca Mountain. The magnitude was 5.6, and the focal mechanism indicates normal...
Estimation of Near-Regional Seismic Ground Motion from Underground Nuclear Explosion Tests
A problem unique to the location of a nuclear waste repository adjacent to the Nevada Test Site is the assessment of seismic ground motion from potential underground nuclear explosion...
Design of Underground Repository Openings in Hard Rock to Accommodate Vibratory Ground Motions
A methodology and preliminary application for designing repository openings to withstand vibratory ground motions is presented. The methodology first establishes the design basis ground...
Block Dynamics Modeling in Support of Seismic Design
The behavior of an underground excavation is usually characterized by stresses and displacements which develop around the excavation as a result of prevailing field conditions. For conventional...
Seismic Design of Circular-Section Concrete-Lined Underground Openings?Preclosure Performance Considerations for the Yucca Mountain Site
Yucca Mountain, the potential site of a repository for high-level radioactive waste, is situated in a region of natural and man-made seismicity. Underground openings excavated at this...
Seismic Considerations in Sealing a Potential High-Level Radioactive Waste Repository
The potential repository system is intended to isolate high-level radioactive waste at Yucca Mountain according to the performance objective - 10 CFR 60.112. One subsystem that may contribute...
Dynamic Response of Tunnels in Jointed Rocks
We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions...
Stress Wave Loading of a Tunnel: A Benchmark Study
Five different finite element or discrete element computer codes were used to solve a sequence of problems leading to the problem of stress-wave loading of a circular tunnel in a jointed...
Optimal Cost Basis for Seismic Design
The paper summarizes a methodology for establishing seismic design levels based on a cost-benefit assessment. The methodology requires the development of costs and benefits for varying...
Guidelines for the Development of Natural Phenomena Hazards Design Criteria for Surface Facilities
This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear...
Return to search