Consulting Engineers' Experience with CAD
A general, brief history of the role of computers in design in consulting engineering practice is presented. Their changing role from their initial early use to today's involvement...
Selfweight Consolidation of Very Soft Clay by Centrifuge
This paper reports a series of selfweight consolidation tests and their analysis by Mikasa's consolidation theory. The tests covered a coastal reclamation project and the...
Yield Behaviour and Consolidation. I: Pore Pressure Response
This paper discusses the frequency of occurrence of anomalous consolidation behaviour. The behaviour of soft clay is discussed briefly in terms of the effective stress path/yield envelope...
Yield Behaviour and Consolidation. II: Strength Gain
In Part I it was shown that in situ yielding of soft foundation clays significantly affected consolidation behaviour and that yield could be defined using the effective stress path/yield...
Instrumentation Performance in Soft Clay Soils (A Case History)
In 1978, IDEAL BASIC INDUSTRIES, INC. initiated construction of a cement manufacturing plant located south of Mobile, Alabama on the Theodore Ship Channel. Because deltaic clays were too...
Sedimentation and Self Weight Consolidation of Dredge Spoil
Test results suggest that self weight consolidation begins when an interface forms in the settlement column and the slurry reaches a critical concentration as a result of the solid particles...
Application of Finite Strain Consolidation Theory for Engineering Design and Environmental Planning of Mine Tailings Impoundments
A knowledge of the consolidation behavior of mine tailings, during and after deposition, is important in estimating final impoundment capacity, rate and pore fluid expulsion during and...
Trends in Computerization in the Eighties
This paper addresses trends in computer-aided productivity tools for Civil Engineers in the eighties. Certain aspects of the past history, present status, and future of CAD/CAM and CAE...
Repairing New York's Historic Bridges
The Brooklyn and Manhattan bridges are just two of New York City's venerable structures that are undergoing rehabilitation. Current work on the Brooklyn involves enlarging...
Monitoring of an Ocean Dredged Material Disposal Site
The Tampa Harbor Project involves deepening and widening approximately 50 miles of existing shipping channel in Tampa Bay, Florida, with the removal of approximately 70 million cubic yards...
Systems for Reducing Sedimentation in Berthing Facilities
Five systems are described which can be used to reduce sedimentation in harbor berthing areas. These systems, which are alternatives to conventional dredging, are based on either the resuspension...
Dredging Developments in the Canadian Arctic
The use of dredges in the Canadian Arctic in connection with oil exploration programmes has lead to the adaptation of existing and adoption of new techniques. Further development is required...
Engineering for Beach Restoration Dredging
Beach restoration utilizing offshore dredging has proven to be the most economical way to restore beaches in Florida. There have been over a dozen projects constructed using this method...
Implementation of EPA/Corps Site Evaluation Guidance
Past site evaluations have resulted in expensive and time-consuming field studies and a nationwide delay in final designation of interim sites. Recognizing the problem, a joint Corps/EPA...
Settlement and Stability of Ocean Disposal Mounds
This study examines the engineering behavior of dredged material disposal mounds in Long Island Sound. The study area is located about eight miles off the coast of New Haven where several...
Wetland Creation in Baltimore Harbor
Three areas of Baltimore Harbor were examined for use as wetland sites by Interstate Division for Baltimore City. Each site presented unique and interesting challenges to design. Economic...
The London Dumping Convention and Its Role in Regulating Dredged Material: An Update
The United States is signatory to an international treaty that is implemented through the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter (London...
Tampa Harbor Florida Deepening Project
Tampa Harbor is one of the largest dredging projects ever undertaken by the Corps of Engineers. The major features of the deepening project which presented the greatest problems were the...
An Offshore Mound Constructed of Dredged Material
The concept of using dredged material to intentionally construct an underwater mound was tested and confirmed at the Dam Neck Disposal Site, 4 miles offshore Virginia Beach, Virginia....
Environmental Management Problems of Dredged Material Islands in the Tampa Bay Area
Between 1977 and 1982, four new islands were created in Hillsborough Bay as part of the Tampa Harbor Deepening Project. The islands are now 3-7 years old. They exhibit striking differences...
Return to search