Effluent Dispersion Measurements Under Sea Ice
Field measurements of the dispersion of effluent from the Seawater Treatment Plant (STP) at Prudhoe Bay, Alaska, were made during April 1985. The primary objective was to determine whether...
Insulation Performance Beneath Roads and Airfields in Alaska
Evaluations of the long-term thermal performance of installations in Alaska for frost heave control have included sampling and testing of the insulations to determine the retained thickness,...
Waterfront Stabilization Project, Kaktovik, Alaska
This paper discusses an innovative 384-foot treated-timber cribwall design utilized to control rapidly accelerating thermal erosion and establish a roadway along the bluff on the Beaufort...
Wave Forces on an Arctic Monotower Platform
At offshore lease sites located along the western coast of Alaska, longer periods of open water can be expected. As a result, wave induced hydrodynamic loading will become a more significant...
Legal Concerns in Cold Regions Engineering and Construction
For a variety of reasons the potential for the imposition of liability and the potential for comparatively large damage claims is greater in cold regions. It is the purpose of this paper...
Upper Delaware River Ice Control?A Case Study
During February 1981 a castastrophic breakup ice jam occurred along a reach of the Delaware River near Port Jervis, NY, causing 14. 5 million in damages. In February 1982 another breakup...
Expert Systems and Engineering Design Knowledge
As in many current AI (Artificial Intelligence) systems, knowledge processing is the most important issue in expert systems. 'Knowledge' in engineering applications...
Applications of Artificial Intelligence in Preliminary Structural Design
The field of Artificial Intelligence (AI) deals with the problems of modeling human intelligence. The application of AI to structural engineering has been limited, but potential applications...
Finite Element Analysis of Concrete Armor Units Subject to Wave Impact
Concrete armor units are commonly employed for the protection of shorelines and rubble structures. Their design is primarily based on hydrodynamic stability. However, their structural...
Solving Finite Element Structural Dynamic Problems on Small Computers Using Semi-Explicit Methods
Numerical techniques based on the partial decomposition of a coefficient matrix, are developed for structural dynamic problems. Improved iterative techniques are discussed which could...
Managing Software for More Efficient Design
Efficient design of structural members with microcomputers requires a large variety of analysis, design, and check programs. The management of these programs can best be accomplished with...
Symbols for Controlling CAD Software
The use of graphic symbols for controlling complex CAD software is discussed. Emphasis is put on the advantages of icons over text. Guidelines for developing and adapting graphic symbols...
Nonlinear Structural Analysis on an Engineering Workstation
The objective of this paper is to demonstrate the feasibility of solving nonlinear structural analysis problems on a desktop engineering workstation. The paper summarizes the main features...
Self-Adapting CAD Software
An approach for enhancing CAD and other interactive software is described. The goals of the approach are bifold, to customize complex programs which employ computer graphics, and to improve...
An Interactive Shell for Batch Processors
Many programs have been and are currently being developed in which the input data files or associated databases must be developed independently of the main program. This paper describes...
Structural and Architectural Maintenance Management by Micro-computer
When a new Senior Vice-President for University College, the nonmedical portion of the University of Alabama at Birmingham, was appointed in 1984, one of the problems encountered by the...
Seismic Structural Optimization and Computer Programs
A generic system has been developed for the geometric design of highway retaining walls. Merging the three-dimensional coordinate geometry capabilities of the roadway design system (RDS)...
Engineering Optimization Via Genetic Algorithm
The application of a genetic algorithm (GA) to the optimal design of a ten member, plane truss is considered. Genetic algorithms are search procedures based upon the mechanics of natural...
Design Improvements Using Finite Elements and Optimizing with Approximate Functions
A design optimization module has been added to the finite element program ANSYS, designed to aid the engineer in reaching an improved or optimum design. The numerical technique employed...
Interactive CAL Modules for Mechanics of Solids
Traditionally the basic engineering course in 'Mechanics of Solids' has proven to be a challenge to both the students and faculty, for although the fundamental...
Return to search