Refined Modeling to Estimate Sediment Discharge
Numerical solution of the two-dimensional turbulent flow over a train of identical dunes is obtained with the Algebraic Stress Model for closure. The effective tractive force acting on...
Versatile Methodology for Flow Depth and Velocity Modeling in Stream Aquatic Habitat Assessment
The habitat assessment methodology developed by the IFG Instream Flow Group is a useful tool for evaluating instream flow needs. The methodology for basin flow modeling developed in this...
Physical Model Verification of a Coastal Discharge
A 1:75 scale physical model of a thermal discharge into a rocky, semi-enclosed bay was verified against extensive field data. The model accurately reproduced the prototype temperature...
Steel Plate Girder Alternate I-10/I-17 Interchange
The scope of the Phoenix I-10 Viaduct allowed extensive study for the optimization of this moderate span steel plate girder bridge. The value engineering studies lead to the use of the...
Prediction of Deformations Due to Heat Curving
This paper summarizes the state of the art in the thermal deformation techniques. Alternate analytical methods are described. The limitations and accuracy of these models are noted, and...
Evaluation and Surveillance of Concrete Bridge Structures
A number of cost-effective techniques are available for evaluation and surveillance of concrete bridge structures. The methods covered in this paper include: long-term bridge instrumentation,...
An Analytically Derived Distribution Function for Flood Volume
A general stochastic model is proposed to determine analytically the distribution function for flood volume. A flood event in this study is defined as an unbroken sequence of consecutive...
A Versatile Methodology for Flood Frequency Analysis
Many observed annual flood series exhibit reverse curvatures when plotted on lognormal probability paper. The occurrence of these curvatures may be attributed to storm and basin factors....
The GEV Distribution in Drought Frequency Analysis
Three decades have passed since A. F. Jenkinson found the general solution to the Stability Postulate, which is the condition that all the extremes must meet, and after him that solution...
Deriving Streamflow Distribution Probabilities
Streamflow distribution probabilities are often involved in the stochastic analysis of water resources systems. Limited by data availability, certain probability terms can hardly be abstracted...
Impact of Temperature on Columbia River Winter Floods
During the course of an extensive study of the Columbia River drainage to evaluate a major levee system near Portland Oregon, it was noted that flood runoff produced by winter storms with...
Combined Finite Difference/Finite Element Analysis for Soil Structure Interaction
A method for the analysis of buried structures subjected to stress transients is presented. The method combines the finite difference and finite element techniques to provide the analyst...
On Steel Connection Data Bank at Purdue University
The aim of the establishment of the steel beam-to-column connection data bank program at Purdue University in 1986 was to provide the necessary data base for the determination of the moment-rotation...
Dynamic Fracture Toughness of Rail Steels
As new premium alloy rail steels exhibit increased wear resistance and as track lubrication is used, the failure mode for rails is shifting from wear to fatigue. Elastodynamic finite element...
A Fatigue Study of Prestressing Strand
Strand fatigue data reported in the literature and also from recent tests were combined to form a data base of strand fatigue data which was analyzed using regression analysis techniques....
Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...
Mechanical Properties of Model Ice Rubble
Experiments were conducted to measure the mechanical properties of bulk ice rubble. Tests were performed under isothermal and plane strain conditions. Fresh water ice blocks were used...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Teacher Friendly Transportation Programs
This contribution describes a set of computer programs that has mainly been developed to demonstrate operating and possibilities of mainframe programs during lectures. The program set...
FEM-Flow Analysis in Hydraulic Turbomachinery Runners
Finite element calculations of the flow through distributor and runner of hydraulic turbomachines are presented. The method is quasi-3D and inviscid, but the deviations from a potential...
Return to search