ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Reliability of Electric Power Transmission Systems in Seismically Active Metropolitan Tokyo: Part 3. Seismic Reliability Analysis
The seismic reliability of the connectivity of electric power transmission networks is evaluated by using the results of Parts 1 and 2. The fragility curves for the supporting structures...

Reconciliation Between Probabilistic and Deterministic Seismic Margin Analysis Methods
This paper presents a procedure for reconciling the results from the probabilistic and deterministic methods for calculating a high confidence of a low probability of failure (HCLPF) capacity...

Design of Buildings Under Earthquake Loadings Using Three-Stage Friction-Grip Elements
A simple method is given for the design of earthquake resistant buildings using three-stage friction-grip elements. Predesign is done by static analysis and verification is performed by...

A Continuous Damage Index for Seismic Reliability Assessment of Structural Steel Elements
Based on experimental investigations using steel plate elements subjected to cyclic axial loading, a continuous damage and/or deteriorating process is examined. In order to describe intermediate...

A Study of Seismic Reliability of Base Isolated Building Comparing with Non Base Isolated Building
An approach to discuss the difference between reliability of base-isolated buildings and that of non base-isolated buildings is presented. The fragility analysis method in PRA procedure...

Aseismic Reliability of a Strengthened R.C. Single Story Industrial Building
Based on results of seismic hazard analysis for a considered site, seismic reliability of a strengthened RC single-story industrial building against collapse has been evaluated. Inelastic...

Structural Failure Probabilities of the HDR-Containment Under Earthquake Loading
A computational procedure for the evaluation of structural failure probabilities due to earthquake loading is developed. Uncertainties in structural and material parameters are taken into...

Seismic Reliability of Non-Linear Structures with Stochastic Parameters by Directional Simulation
The application of improved Monte Carlo method by Directional Simulation and Importance Sampling is presented with reference to the assessment of seismic fragility of reinforced concrete...

Response Analysis of an Elasto-Plastic System Under Nonstationary Random Input
This study presents that the variance of cumulative plastic deformation of a simple elasto-plastic structure under seismic excitation can be estimated in a relatively simple theoretical...

Responses of a Secondary System and Its Supporting Hysteretic Structure to Seismic Excitations
We consider an N-story building that supports 1-degree-of-freedom equipment on one of the floors, and examine both the building's and the equipment's responses...

Reduction of First Excursion Probability of Nonlinear Secondary System
This paper deals with reduction of first excursion probability of nonlinear secondary system subjected to seismic excitations. Especially, gap and friction characteristics are considered...

Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...

The N-Year Maximum Mean Values and the Coefficients of Variation of Loads Subjected to Port and Offshore Structures
It is necessary to know mean values and coefficients of variation of loads in order to verify the safety of structures. In this paper, the N-year maximum mean values and the coefficients...

Optimum Studies of Coefficient Variation of UBC Seismic Forces
This paper presents an optimization algorithm for finding optimal parameters of a nondeterministic structure subjected to UBC seismic load for both normal and lognormal distribution models....

Probabilistic Evaluation of Load Factors for Steel Rigid-Frame Piers on Urban Expressway Network
A procedure is proposed for calculating the optimal load factors for steel rigid-frame piers using the extended level 2 reliability method. Twelve typical types of pier structures are...

Ultimate Limit State Design for Earthquake Resistant Steel Frames
This paper describes a basic methodology to assess the reliability of steel framed structures subjected to ultimate earthquakes. After a discussion on past damage criteria, a modified...

Seismic Reliability Analysis for Elevated Pressure Vessels
This paper presents two approaches for assessing the seismic reliability of elevated pressure vessels. A discretized mass mechanical system is used to model the dynamic effects of liquid...

Recent Seismic Risk Studies of Nuclear Power Plants: An Overview
Seismic probabilistic risk assessments (PRA) are conducted to estimate the frequencies of occurrence of severe core damage, serious radiological releases, and consequences in terms of...

Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...

Structural Safety and Reliability
This proceedings of the 5th International Conference on Structural Safety and Reliability (ICOSSAR '89) held on August 7-11, 1989 in San Francisco, California contains almost...

 

 

 

 

Return to search