ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Ultrasonic Flow Meter Testing
Six ultrasonic flow meters were tested in a hydraulics laboratory. Accuracies better than 2% were obtained with two transit-time meters on 14 inch diameter steel tubing. Poorer accuracies...

Geotechnical and Hydraulic Stability Numbers for Channel Rehabilitation: Part II, Application
Stability numbers for bank stability (N_g) and bed stability (N_h) have been developed. Optimum placement of...

Analysis of Progressive Development on Alluvial Fans
Flow on alluvial fans is considered to be somewhat unpredictable and complex, experiencing high velocities, avulsions, erosion, and deposition causing a dynamic topography with flooding...

Entrainment of Bed Sediment by Density Underflows
The erosion caused by a density-driven underflow has been studied experimentally. The observations indicate that a strong density current can entrain substantial amounts of bed sediment....

Upland Erosion Estimates Based on Rainfall Depth
The probability density functions of rainfall duration and intensity are coupled with a physically-based dynamic formulation of rainfall-runoff-sediment transport for upland areas. When...

The USDA Water Erosion Prediction Project
New generation water erosion prediction technology is being developed by the USDA Water Erosion Prediction Project (WEPP). The new technology is expected to replace the Universal Soil...

Mathematical Modeling of Delta Deposits and Retrogressive Erosion in Reservoirs
A hybrid computer model which simulates mainly delta deposition and retrogressive erosion in reservoirs is described. Basic equations that govern the flow and bed changes used in the model...

Analysis of Onsite Measurements of Scour at Piers
Existing onsite measurements of local scour at bridge piers were assembled and analyzed to obtain an equation that predicts the expected maximum depth of local scour at a bridge pier....

Flow Field and Bed Topography in River Meanders
A mathematical model is developed for the calculation of flow field and bed topography in curved channels with an erodible bed. A small perturbation approach is used to linearize the governing...

Channel Response to SCS Type-C Grade-Control Structures on Burney Branch, Mississippi
Five SCS Type-C grade-control structures were installed in Burney Branch in 1980 to remove 59.4 feet (18.1 m) of grade. The performance of the structures was evaluated in 1984 after they...

Fine Contaminated Sediment Erosion/Deposition in the Buffalo River, New York
This paper documents part of a project which sought to characterize sediment transport in the Buffalo River as a contribution toward planning for dredging or in-place containment of the...

Performance Evaluation of Channels Stabilized with ARS-Type Low-Drop Structures
Field and hydraulic investigations of seven ARS-type low-drop grade-control structures located in Mississippi indicate that most of the structures become submerged during flows with recurrence...

Alternate Designs for the Sidewalls of Hydraulic Jump Stilling Basins
This paper discusses several alternate designs to replace the full height sidewalls of a type 2 U.S. Bureau of Reclamation stilling basin. The alternate designs that were investigated...

Application of Reservoir Sedimentation Data to Problems of Environmental Management
Application of sediment delivery ratios and sediment routing procedures to sediment measurements provide an alternative approach to the prediction of localized average annual erosion rates....

Physical Model of Local Scour at Grade Control Structures
A physical model of local scour occurring at grade-control structures was operated at an undistorted Froude number prototype-model scale ratio of 1:4. The maximum unit discharge in the...

New Methodology for Determining the Optimal Rehabilitation and Replacement of Water Distribution System Components
A methodology is presented for the determination of the optimal timing for the rehabilitation/replacement of water distribution system components in order to minimize costs. In this model...

Hot Pressing of Lunar Soil and Qualification for Manned Applications
Lunar soil may be fabricated into useful building materials analogous to those used for masonry, concrete and ceramic pipe applications on earth. The process has been analyzed theoretically...

Transportation by Pipelines in Space Colonies
The use of pipelines in space colonies to transport liquid, gas, solids and even passengers is not only feasible but also desirable. For many applications, pipelines offer a number of...

Pipeline Infrastructure
These proceedings include papers which cover the topics of innovative pipeline design, condition monitoring, soil-pipe interaction, inspection, maintenance, and rehabilitation. These collective...

Brighter Future for Stay Cables
Corrosion problems on cable stayed bridges can be prevented, according to several engineers who responsed to Cables in Trouble, a Civil Engineering article that appeared in the April 1988...

 

 

 

 

Return to search