Observed and Predicted Response of Piles Under Dynamic Loads
Vibration tests were conducted on a single pile 450 mm diameter and driven to a depth of 17 m. The dynamic soil properties were also determined by conducting in-situ tests. The response...
Forced Vibration Testing of an Expanded Base Concrete Pile
Forced vibration testing of a full-scale cast-in-situ expanded base concrete pile supporting a structural mass was conducted as part of a test pile program for a paper mill expansion at...
First and Second Order Dynamic Subgrade Models for Soil-Pile Interaction Analysis
The three-dimensional continuum solutions are used to examine the physical insight of a first order dynamic subgrade model, originally applied by Novak for dynamic pile response analysis....
Design Loads for Sloshing in TLP Pontoons Tanks
Impact of fluid inside the Auger TLP ballast tanks on tank walls was investigated and changes made to the structural design in an accelerated fashion through the use of model testing....
A Simple Method to Compute Wave Loads on a TLP
In this paper, analytic diffraction (Linton and Evans, 1990) and radiation (Kim, 1992) solutions for arrays of bottom-mounted vertical circular cylinders are used to compute hydrodynamic...
Probability of Wave Force on Horizontal Members
This study is motivated by the works of Isaacson and Subbiah (1990) to evaluate the vertical wave force on a rigid horizontal member located in the vicinity of still water level with its...
Reliable Design-Wave Force Predictions for Seabed Pipelines
The results of three separate field research projects have been pulled together to provide a design formula for maximum wave-induced horizontal force on a submarine pipe. This broadly-applicable...
Pipeline Storm Behavior on Clay Soils
A series of transverse wave loading tests was conducted on a specially mounted section of pipe in a sediment-filled tank, to investigate the stability of unburied submarine pipelines under...
Upper Bound Limit Analysis of Deep Skirt Structures' Foundations
A solution to the problem of determining the bearing capacity of an embedded footing (foundation) subjected to arbitrary loading is being presented herein. It is primarily intended for...
Wave Slamming on a Horizontal Circular Cylinder
The present paper describes an experimental study of the wave slamming force on a horizontal circular cylinder located near the free surface. The vertical force on a cylinder and the corresponding...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Skin Friction Distrtibutions on Piles in Sand
Presented in this paper are early results from an analytical investigation of the performance of a closed-ended pipe pile under monotonic axial loading in dense sand. The study was performed...
Review of API Guidelines for Pipe Piles in Sand
Most offshore structures are supported using steel pipe piles which are designed in accord with API Recommended Practice 2A. The guidelines for analysis of axial capacity of steel pipe...
Dynamic Design of Deepwater Bottom-Founded Towers
This paper traces the development of dynamic design techniques for deepwater bottom-founded towers by the following: the classification of bottom-founded towers as either `stiff' or `compliant';...
Equivalent Statistical Quadratization of Nonlinear Hydrodynamic Loads on TLPs
In this paper, a new method is proposed for the expansion of nonlinear drag forces expressed in terms of multivariate Hermite polynomials correct up to the second-order. The drag force...
Dynamic Response Characteristics of Jack-Up Drilling Units
The effects of five parameters on the dynamic amplification of the global base shear on a deep water jack-up drilling unit were analyzed using a time domain nonlinear model. The five parameters...
Response Statistics of Tension Leg Platforms Under Wind Loads
This paper presents the direct integration method and Kac-Siegert technique to solve the first four cumulants in the general quadratic systems, and proposes the splitting technique to...
Advanced Structures in Very Deep Water
Factors which are largely economic will lead to the requirement to design and deploy small numbers of large platforms and large numbers of small platforms in water depths of up to 4 km...
Piles Under Dynamic Loads
This proceedings,
Predicting Sediment Loads
Many reservoirs in the U.S. and internationally have experienced unforeseen storage loss when sediment loads exceed those originally predicted during the design stage. This often results...
Return to search