Elmhurst Quarry Flood Control Project
Conversion of a limestone quarry into an off-line reservoir provides flood protection for a rapidly developing County in the suburbs of Chicago....
Using GIS to Develop 2-D Hydraulic Models
As communities along rivers and streams continue to develop, the demand for more accurate floodplain analysis and flood warning will also increase. Computer systems continue to develop...
Evaluating Sensitivity of Hydraulic Control Optimization Models
Sensitivity of hydraulic control optimization models to variation in gradient constraints is examined. Monte Carlo simulation is used in conjunction with repeated optimization runs to...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Classification of Problem Types
Design and operation of hydraulic systems can be an extremely complex task. Although not widely accepted the application of deterministic optimization techniques can provide guidance to...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Intelligent Decision Support System for Stage Discharge Analysis
A Decision Support System (DSS) for fitting stage-discharge (S-D) relations is being developed by the University of Manitoba, Facility for Intelligent Decision Support, for Environment...
Impacts of Natural and Manmade Changes on the San Luis Rey River Environment
Almost all rivers continually change their position and shape based on various geomorphic and hydraulic factors, caused by natural as well as manmade activities on the riverine environment....
Integration of Water Quantity and Quality Planning
This paper describes the integration of water quantity and quality objectives within the framework of a computerized interface design to assist with the difficult process of long-range...
Modeling Flow in Variably-Saturated Porous Media
An expression for effective hydraulic conductivity to solve groundwater flow problems is developed. Also, a refined Monte Carlo (MC) simulation procedure is proposed. The developed methodologies...
Considering Uncertainties in Water Resource Designs
Design of water resource systems often faces with various uncertainties. The nature of problems in essence are decision making under uncertainties. This paper offers an introduction to...
Recent Advances In Well Hydraulics
Most books and papers on well hydraulics are mostly or entirely aquifer hydraulics. The phrase, 'well hydraulics,' implies a study of the flow into and within a well proper. There has...
Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...
Tug Fork Flood Plain Modifications and Wetlands Mitigation
The West Virginia Department of Highways (WVDOH) is using a two stage channel excavation concept to mitigate the hydraulic impacts of relocating U.S. Route 119. The selected highway alignment...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
CAD for Small Hydro Projects
The quest to reduce design costs and improve design quality by raising productivity is familiar to every manager and designer. This article examines how CAD can play a role by examining...
Success Syndrome: The Collapse of the Dee Bridge
Scaling up existing successful designs can cause latent weaknesses to become dominant, leading to catastrophe. By studying past failures where this has happened--for example, the 1847...
Recommendations for Standards in Hydraulics
Prepared by the Task Committee on Recommendations for Standards in Hydraulics of the Hydraulics Division of ASCE. This report investigates whether...
Roller Compacted Concrete IV
This engineering manual
Return to search