Probability Based Evaluation of Spillway Capacity
Spillway adequacy could be evaluated more objectively if estimates were available of the probabilities of discharges up to the Probable Maximum Flood (PMF). As a first step in making such...
An Analysis and Comparison of Probable Maximum Floods with 10,000-year Frequency Floods and Maximum Observed Floods for Spillway Design
The use of deterministic probable maximum floods are supported in part by the conclusions of an Interagency Work Group formed to address the following questions: (1) Is it within the state...
Paleoflood Studies in Colorado
Paleoflood hydrology is the study of botanic, sedimentologic and geomorphic flood evidence remaining in a valley. Paleoflood studies in the Colorado foothills and mountains have been used...
Criteria for Selecting a Reservoir Routing Method
Results of an investigation comparing dynamic and storage reservoir routing applied in dam safety analyses are presented. Outflow hydrographs computed by these reservoir routing methods...
Verifications and Applications of a Nonpoint Source Pollution Model
To meet the needs of the Illinois Comprehensive Monitoring and Evaluation (CM&E) project of the Rural Clean Water Program (RCWP), the Agricultural Nonpoint Source Pollution Model...
Legal Misuse of Urban Hydrology Concepts and Regulations for Rural Areas
This paper presents recent observations of the misuse of technical definition, hydrologic concepts, sedimentation engineering principles, and flood control regulations by the legal profession...
Optimization of Complex Hydrologic Models Using Random Search Methods
The primary objective of automated calibration of complex conceptual hydrologic simulation models is to find the global optimum of a specified response surface. While direct search techniques...
Automatic Calibration of Conceptual Rainfall-Runoff Models
An automatic calibration strategy applied to land and channel components of the National Weather Service River Forecast System is outlined. Aspects discussed include the objective function...
A New Method for Synthesizing a Six Hour Unit Hydrograph
A new methodology was devised that would use readily available basin physical parameters for the determination of unit graphs in undeveloped and ungaged areas. Rather than using small...
Time Base of a Hydrograph
For design projects in water resources, a hydrograph is commonly used to determine the required flood volumes. The time base of a hydrograph is a crucial parameter in such studies, and...
Modified CIMIS Irrigation Scheduling Program
CIMIS, California Irrigation Management Information System, is a program that collects weather data around the state to assist irrigators in planning and scheduling their irrigations....
Serviceability Limit States in Load Space
Deflection and elastic limit state curves are drawn in load space using a nonlinear structural analysis program. Use of load space simplifies computation of point estimates of serviceability...
Geologic Assessment of Seismotectonic Hazards
Design and modification of dams require evaluation of potential seismotectonic hazards based on consideration of the historic earthquake record and deterministic evaluation of geologic...
Optimum Cut-Outs on Plate Stability
Cut-outs are unavoidable in some of the plate components. To minimize the plate weight, in the meantime, to maintain the critical buckling load as high as possible is one of the major...
Lateral Impedance of Contact Pile Foundations
The static and dynamic lateral impedance of pile foundations for which there is continuous contact between the bottom of the pilecap and the underlying soil is investigated. A parametric...
Risk Assessment for Cladding Panels: An Expert Systems Approach
Risk assessment for structures in the context of wind engineering involves many factors such as wind hazard, the wind sensitivity of the structure and the socio-economic value of the structure....
The Risk of Progressive Collapse of Single-Story Buildings in Severe Storms
The probability of severe damage and progressive collapse of single-story commercial, institutional and residential buildings is examined. Observations of actual damage and the results...
Assessment & Control of Wind Created Risk During Construction
Structures under construction have been damaged by winds. The damaging winds, typically, are much lower than the design wind loads for completed structures. Little guidance is available...
Full-Scale On-Site Wind Induced Data From a Tall Building
Under the sponsorship of the National Science Foundation (NSF), a large amount of data accumulated in a study of the behavior of a tall building under the influence of winds will be made...
Prediction and Measurement of Wind Response: Case Story of a Wind Sensitive Building
The wind-induced horizontal accelerations of a 43 story office tower in New York City were monitored during 11 occasions over a period of about six months. The building dates back to the...
Return to search