Continuous Simulation of Gaussian Processes with Given Spectrum
A new algorithm, to be called MIMA (modulated interpolated moving average) allows stationary Gaussian processes with given spectral density to be simulated in continuous time, while providing...

Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...

Clearing Space Debris Using Energetic Materials
Space debris is growing at an alarming rate. It consists not only of old, unusable payloads but also aluminum oxide combustion products of various space delivery systems and small fragments...

Wave Propagation in Hyper-Structures
The concept of hyperelement was introduced by E. Kausel and J.M. Roesset, 1977 in connection with the derivation of the dynamic stiffness matrix for layered continuum problems involving...

Dynamics of Composite Tubes
A displacement-based stiffness method is used to study the characteristics of dispersive wave propagation in laminated composite cylindrical tubes. It is assumed that the tube is composed...

Investigation of HVAC Systems in Low Gravity Application
This paper has been developed to identify and summarize the principal areas of investigation necessary to design and install functional HVAC systems in low gravity applications. These...

Black Holes
For many years, scientists have searched the skies for black holes; stars even more massive than white dwarves. As of yet, there have been no 100% sure sightings. Since they do not emit...

Curvilinear Long Wave Hydrodynamic (CLHYD) for Tidal Circulation and Storm Surge Propagation
The objective of this paper is to demonstrate the ability of a two-dimensional long wave hydrodynamic model to simulate long wave processes in curvilinear coordinates. The series of tests...

Comparison of Computed and Observed Velocities at Three Estuarine Sites
The Generalized, Longitudinal-Vertical Hydrodynamic and Transport model (GLVHT) has been applied to the Patuxent River estuary, the Raritan River Estuary and the Arthur Kill. The applications...

Sounding Out Buried Waste
Geophysical diffraction tomography (GDT) is a new remote sensing technique for quantitative high-resolution subsurface imaging. It is similar to optical holography where long wavelength...

Strides in Nondestructive Testing
Stress wave methods of nondestructive testing are increasingly used in civil engineering applications. Four case histories of the use of different types of stress wave testing are given....

Slips Ahoy
Klancnik discusses the markets for marina construction in the 1990s. The past decade saw a boom in the boating industry and in the design and construction of marinas. The market will remain...

Rheological Properties of Simulated Debris Flows in the Laboratory Environment
Steady debris flows with or without a snout are simulated in a 'conveyor-belt' flume using dry glass spheres of a uniform size, 5 or 14 mm in diameter, and their...

Flume Experiments on Debris Flow
With the different characteristics of grain motion in debris flow, three layers are vertically divided, i.e., viscous collision layer, inertial collision layer and suspension layer. Both...

Two-Dimensional Modeling of Overland Flow
Two-dimensional distributed finite element (F-E) and finite difference (F-D) models are developed to simulate storm events on arid watersheds. The F-E model uses the kinematic wave approximation,...

Waves in a Fluid Mud Layer Flowing Down an Incline
To model the dynamics of fluid mud, lava, or debris with a high concentration of cohesive clay particles, we consider a thin sheet of Bingham plastic fluid flowing down a slope. The Bingham...

Field Observation of Roll-waves in Debris Flow
In 1979, the observatory of debris flow was set up in the Hase River of Mt. Sakurajima in Japan which is one of the most active volcanoes in the world. Obvious roll-waves on each debris...

Some Aspects of the Mechanism of Debris Flow
As the first step of the development of a general two-phase flow model for debris flows, a simple granular model, which is considered as a special case of the two-phase flow model, is...

Armor Layer Evolution
This communication presents an analysis of celerity propagation for non-uniform materials. Based on the corresponding flow, sediment transpot and sorting/armoring equations, the celerity...

Predicting Alluvial-Fan Sediment-Water Slurry Characteristics and Behavior from Sedimentology and Stratigraphy of Past Deposits
Slurry characteristics can be predicted by a combination of field and laboratory analyses. Field observations are needed to determine deposit stratigraphy and to estimate the abundance...

 

 

 

 

Return to search