Plunge Pool Erosion in Cohesive Soils at Two Dams in Kansas
Results of a field study of two plunge pools scoured by horizontal pipe outlets discharging on cohesive channels are analyzed. Formulas for critical tractive shear stress based on plasticity...

Risk Analysis in Dam Safety Programs
There are about 68,000 dams in the Nation. About 95 percent of the dams are nonfederal; the balance are owned by various agencies of the federal government. Over 30 percent of the high...

Walden Hydroelectric Power Project
The Wallkill River at Walden, New York, produced hydroelectric power from 1909 to 1966. Using turbines dating back to the original hydroelectric development, the Walden hydroelectric station...

Quality Assurance for Cold Regions Construction
Quality Assurance for cold regions construction begins at the design stage. Unique civil, structural, material and equipment requirements for the severe arctic environment and continuous/discontinuous...

Thaw Settlement Analysis for Buried Pipelines in Permafrost
This paper focuses on determination of allowable thaw settlement for the design of cross country pipelines in permafrost areas. The purpose of the thaw settlement evaluation is to aid...

Economics of Regionalization
This report investigates some of the arguments for and against regionalization of systems in the water supply industry. The history, potential advantages, disadvantages and costs and benefits...

Geological Environmental and Soil Properties
Proceedings of the Geological Environment and Soil Properties Convention held in Houston, Texas, October 17-21, 1983. Sponsored by the ASCE Geotechnical Engineering Division. Geological...

Journal of Professional Issues in Engineering
The?Journal of Professional Issues in Engineering Education and Practice?presents issues of broad professional interest and diverse views of engineering education, and professional practice. Papers examine...

The Microcomputer Explosion in Civil Engineering Firms
During the next five years, small and medium size consulting engineering firms will undergo many changes. The key changing force is the low cost ($2500 to $20,000) microcomputer. Already,...

Application of Plasticity and Generalized Stress-strain in Geotechnical Engineering
This volume on the application of plasticity and generalized stress-strain in geotechnical engineering is divided into two main sections, with an introduction on soil constitutive model...

Directional Wave Spectra Applications
These collected papers and their ensuing discussions presented at the September, 1981 symposium at the University of California on directional wave spectra applications examine the present...

State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete
This comprehensive state-of-the-art report contains a summary of the special features of finite element analysis applied to reinforced concrete, including: constitutive relationships,...

Engineering Schools Respond to Financial Crisis
A mail survey of the 200-plus civil engineering departments at engineering schools asked each chairman for a case history of response to the financial and other crises facing the departments....

Engineering and Business
Converting Engineers to Businessmen
Business practices and the role of the engineer as manager are covered in the papers presented at a symposium on engineering management at the October, 1982 National Convention of the...

Recent Development in Geotechnical Engineering for Hydro Projects
Eleven of the papers presented at three sessions of the ASCE Geotechnical Engineering Division at the 1981 International Convention are included. The papers are divided into two subjects:...

Historic Preservation of Engineering Works
The preservation of historic industrial and transportation engineering works is examined. Preservation is reviewed in the context of history, and preservation through recording is explored....

Why Bother with Historic Preservation�
Two case histories are examined regarding old dams that were preserved because of their historic importance, as well as their practical use. One example concerns a dam that was exposed...

Limit Equilibrium, Plasticity and General Stress-Strain in Geotechnical Engineering
Papers and discussions from the workshop on limit equilibrium, plasticity, and generalized stress-strain in geotechnical engineering are presented. The papers address aspects of the problems...

Computer-Aided Design and Drafting for Small Engineering Firms
As the cost of computer hardware decreases, use of the computer-aided design and drafting is becoming a cost-efficient investment for smaller engineering firms. The article includes four...

Steel Plate Shear Walls Resist Lateral Load, Cut Costs
Two new buildings have a seldom-used stiffening system�� steel plate shear walls. Reasons for using them, rather than reinforced concrete shear walls or steel or concrete rigid frames,...

 

 

 

 

Return to search