Designing for Corrosion Control
This presentation will discuss designing from several aspects: a. Designing of the item to lessen the affects of corrosion. b. Selection of non-corrosive materials in the designing process...
Procedure for Seismic Evaluation and Design of Small Bore Piping
Simplified methods for the seismic design for small bore piping in nuclear power plants have been used for many years. Various pipe designers have developed unique methods to treat the...
Recirculation Piping Replacement Project at Dresden Unit 3
This paper discusses the Recirculation Piping Replacement Project performed at Dresden Unit 3 during 1985 and 1986. It describes several of the technical and administrative problems associated...
A Computerized Completion
The original designers of the 1.6 million sq ft Fillmore Center in San Francisco (its largest mixed-use development project in 20 years) had specified a large amount of steel reinforcement...
Simplified Second-Order Inelastic Analysis for Steel Frame Design
Several current approaches are outlined that account for the spreading of plasticity in a second-order inelastic analysis of frames. The approaches are based on modifications to the simple...
Verification of Approximate Methods of Structural Analysis
Sophisticated computer programs for the determination of the effects of instability on the inelastic stress resultants in steel structures will appear to be 'black boxes'...
Certifying the TN-BRP and TN-REG Transportable Storage Demonstration Casks
The U.S. Department of Energy (DOE) has obtained U.S. Nuclear Regulatory Commission (NRC) certification to transport two transportable storage casks for a demonstration project. Because...
Effect of HNO3-Cerium(IV) Decontamination on Stainless Steel Canister Materials
Stainless steel canisters will be filled with vitrified radioactive waste at the West Valley Demonstration Project (WVDP), West Valley, NY. After they are filled, the sealed canisters...
Modelling Studies for the Assessment of the Advanced Cold Process Canister
The Advanced Cold Process Canister (ACPC) is a new concept for the encapsulation of spent nuclear fuel for geological disposal. It consists of steel canister encased in a copper overpack....
Emplacement Drift Temperature Reduction by Cooling Enhancement and Ventilation
The application of cooling enhancement in a short vertical container emplacement layout is analyzed. Two 25 m-long heat pipes upward oriented at 45 degrees are installed at each emplacement...
A PC-CAD System for Prefabricated Steel Bridges
A microcomputer-aided analysis and design system for prefabricated steel bridges is presented in this paper. The system was customized to perform all the required engineering to analyze,...
Discrete Optimal Design of 3D Frameworks
The paper describes a discrete optimization method for the least-weight design of three-dimensional (3D) steel building frameworks. The method involves the coordinated application of structural...
Strategies Which Permit Multiple Discrete Section Properties per Member in 3D Frameworks
Strategies for discrete structural optimization of 3D steel frames with coupled section properties are presented. These strategies include linearized branch and bound, simulated annealing,...
Data Modelling for Steel Frame Structures
The first step to automate any facet of structural engineering is developing a suitable data representation upon which the computer program will operate. However, there is no standard...
Boston's Sewage Outfall
The centerpiece of the Boston Harbor cleanup plan will be the sewage plant on Deer Island, which will treat water from 43 municipalities in the Boston metro area�500 mgd to start. In order...
Infrared Thermography Based Pipeline Leak Detection
Computerized Infrared Thermographic pipeline inspection is now a refined and reliable process having been thoroughly proven to be an accurate, cost effective, and efficient technology...
Design Program for Gravity Sanitary Sewers
The Gravity Sewer Design Program Version 2.1 M (GSDP2M) performs the hydraulic design for a conventional gravity sanitary sewer network. GSDP2M is written in standard Fortran 77 for batch...
Application of GIS in Monitoring and Trouble Shooting of Water Distribution Systems
In this study, the suitability of Geographical Information System (GIS) to monitor water distribution systems is investigated. Although GIS applications are widespread, the use of GIS...
Diagnostic Options for Pipeline Rehabilitation
The various diagnostic options utilized for solving pipeline problems/failures continue to increase at a very rapid pace. Field reconnaisance and/or man-entry of pipelines is becoming...
The Danby Pipe Renovation System
This paper describes a pipe renovation system and its structural characteristics which is cost effective and technically suitable in all sizes of pipe from 8 inches (200 mm) to the largest...
Return to search