An Information System on the Performance of Suspension Bridges Under Wind Loads
While most suspension bridges for which information is available, in operation between the period: 1701-1992, have performed satisfactorily under wind loads, a few bridges were destroyed,...
After-Fracture Response of a Two-Girder Steel Bridge
The I-40 bridges over the Rio Grande are due to be razed in mid 1993 due to geometry and traffic safety considerations. The bridges are classified as 'fracture critical' two girder steel...
Modal Analysis Technique for Bridge Damage Detection
The dynamic responses of a wide-flange steel beam with artificially introduced cracks were studied analytically and experimentally. Frequencies, displacement mode shapes (DMS) and strain...
Full-Scale Bridge Test to Monitor Vibrational Signatures
A full-scale highway bridge, in the process of being demolished and replaced was monitored using vibrational techniques in its in-service condition. The bottom flange and web of one fascia...
An Efficient Analysis of Framed-Tube Structures
An efficient model for analysis of framed-tube systems is proposed in this study. The proposed model can represent the interaction between plane frames consisting the tube system. Analysis...
Optimal Design of Building Structures Using the Predetermined Sections
A practical optimization algorithm for the member design of building structure is presented in this paper. The emphasis is particularly concentrated on the practical applicability of the...
Damage Estimation of Existing Bridge Structures
During recent earthquakes, severe damage have been reported in many bridge structures. Regardless of many damaged structures, methods to identify damage of structures are still limited...
Ductility Analysis of Overload and Settlement
The concept of sufficient ductility to avoid premature or brittle failures is gaining wide acceptance in structural engineering and is an important aspect in mitigating the consequences...
Finite Element Analysis of a Highway Bridge Hinge
A highway bridge hinge is a very important element in bridge design. It releases thermal stresses that may be developed in the superstructure or the substructure of a bridge. A common...
An Innovative Connection Detail for High-Rise Buildings
Composite columns consisting of hollow steel tubes filled with high strength concrete have been used in high rise building construction in the USA and Far East Asian countries. The focus...
Seismic Design of Steel Beam-to-Box Column Connections
This paper is a study of the ductility requirements of steel beam-to-box column connections using the bolted beam web and welded beam flange details. Since the beam moment at the connection...
Recent Successes in Welding Jumbo Shapes
A rather unique structure utilizing jumbo shapes was recently designed and fabricated. The structure was 100% welded according to the specifications for welding jumbo shapes recently developed...
Design of Monosymmetric Sections in Flexure
Monosymmetric members are generally I-shaped, symmetrical about the plane of the web, and characteristically have a larger compression flange than tension flange. Examples are crane girders...
Inelastic Behavior of Noncompact Steel Bridge Girders
This paper highlights the results from one of several finite element studies of the inelastic moment-rotation behavior of continuous-span non-compact bridge girders at interior-pier locations....
Composite Beams and Joists
Composite beams and joists used as flexural members in multistory steel-frame buildings are considered. Research results have shown that present design values for headed shear studs, used...
Interaction Between Beam and Steel Connections
The overall objective of the investigation is to study the behavior of a particular steel connection type, flush end plate steel connections, subjected to shear, axial forces, and possibly...
Wood Bridge Design Using AASHTO LRFD Specifications
A nationwide project to develop a load and resistance factor (LRFD) design edition of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications...
Design Optimization of an All-FRP Short-Span Bridge
The objectives of this study are: a) to determine the feasibility of designing an all-FRP bridge, and b) to demonstrate the usefulness of optimization techniques in the design of FRP superstructures....
Seismic Resistance of Steel Fiber Reinforced Concrete Beam-Column Joints
This paper discusses the advantages of using steel fibers in seismic resistant beam-column connections. First, the effects of fibers on the various aspects of behavior of concrete are...
Analysis and Design of SFRC Structural Elements
This paper presents and validates practical methods for flexural, shear and torsional analysis and design of fibrous reinforced concrete structural elements. The effects of both fiber...
Return to search