Effect of Moisture and Bulk Density Sampling on Neutron Moisture Gauge Calibration
Three moisture and bulk density sampling methods were evaluated for use in neutron gauge calibration. Each of the methods was comprised of a single core or portions of a core taken during...
Soil Moisture Monitoring Using a Portable Capacitance Probe
Accurate monitoring of soil moisture has long been in integral part of a successful agricultural management system. Water has increasingly become a valuable and much sought after natural...
Water Penetration Manual for California Soils
Slow water penetration in irrigated soils is a complex problem of major importance in California's $18 billion agricultural industry. The Kearney Foundation of Soil Science chose to work...
Evapotranspiration of Dry Beans with Drip Irrigation
Information about the effect of irrigation on dry bean production in the Southwestern Colorado is very limited. The primary objective of this study is to establish a crop water use (ET)...
A Solid Waste Solution
Burgeoning growth and diminishing landfill capacity have been propelling Broward County, Fla. toward a solid-waste crisis. The county, located along Florida's southeastern...
Watershed Erosion
Scientific agricultural planning requires knowledge of the relations between soil and water that cause soil loss, and of the procedure to reduce such losses on cropland. This paper presents...
Total Sediment Loads of Tropical Rivers
Unmeasured and total sediment discharges were computed for 107 sets of data from the Amazon and Orinoco Rivers and their major tributaries. Unmeasured loads were generally small except...
Bed Sediments Size Changes, Atchafalaya River
During low flows of 1989 and 1991, we collected bed sediment samples from the thalwegs of the Mississippi River from Cairo, Illinois, to Head of Passes and along the Atchafalaya River...
Bank Stability Analyses Versus Field Observations
The concept and process of stream bank stabilization design through the development and use of limiting stability curves for the comparison of existing bank height/angle combinations to...
Video Analysis of Gravel Saltation
Experimental results concerning saltation characteristics of gravel particles in a movable bed channel are analyzed by using video imaging techniques. Ensemble averaged values of saltation...
Drag Characteristics of Coarse Sediment in Clay Suspensions
Drag characteristics of spherical particles in clay suspensions, such as coarse sediment in hyperconcentrated flows, has been analyzed by using a limited data available in the literature....
The Influence of Protective Material on Local Scour Dimensions
Protective materials installed around the base of a bridge pier can reduce or prevent local scour. The performance of four materials: grout mats, grout bags, footings, and riprap, are...
Prediction of Filtrate Turbidity by Parameter Estimation
In order to operate the rapid sand filter in response to the time variation of effluent quality, a model and a procedure to predict the filtrate quality of rapid sand filters have been...
Scour Inspection Using Ground Penetrating Radar
This paper examines the capabilities of Ground Penetrating Radar (GPR) for river bed scour inspection based on a study carried out by Clarkson University, Potsdam, New York in association...
Connection of Grouted Tubular Insert Piles to Soil
Force transfer between offshore production jackets and tubular piles is effected by weld bead shear connectors, acting within the grout filled annulus between the piles and pile sleeves...
The Pipe/Soil Stiffness Ratio Variable
This paper reviews the factors which affect the reactions and defines performance limitations of buried flexible plastic pipe as a function of load-induced strains and deflections. The...
Ovality in Pipe Rehabilitation Design
Pipes in need of structural rehabilitation often have longitudinal cracks (at the crown and elsewhere) and exhibit significant ovality (5-10%). When these pipes are lined with current...
Sliplining: Design and Installation Considerations for Polyethylene Pipe
The design methodology and installation procedure for polyethylene slipline renewal are discussed. When designing there are two critical phases which must be considered: (1) short-term...
Microtunneling with PVC Pipe
PVC is a suitable and economical product for sewer system construction. However, in the past, utilization of PVC sewer pipe in microtunneling was impossible due to axial thrust load limitations...
Townsite Lateral-Stage 2 Belle Fourche Unit - Cheyenne Division Concrete: Pipe with Dumped Bedding and Embedment
In 1933, M. G. Spangler presented three bedding configurations and the concept of a bedding factor to relate the supporting strength of buried concrete pipe to the strength obtained in...
Return to search