Finite Element Large Deflection Analysis of Cylindrical Shells with Different Types of Cutouts
Nonlinear finite element is used to find the elastic buckling load and the maximum deflection for cylindrical shells subjected to unsymmetrical pressures due to wind. These shells are...
Inflation Instability of Cylindrical Membranes
A new procedure which investigates inflation instability of cylindrical nonlinear membranes is developed. The general characteristics of inflation instability are described. An efficient...
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...
Vacuum Melting and Mechanical Testing of Simulated Lunar Glasses
Lunar silicate glasses may possess superior mechanical properties compared to terrestrial glasses because the anhydrous lunar environment should prevent hydrolytic weakening of the strong...
Strength and Fracture of Glass in the Lunar Environment
Due to the lack of water on the moon, the effects of hydrolytic depolymerization - stress corrosion cracking - will be nonexistent in glasses produced and used on the moon. This would...
Coastal Engineering Practice
This proceedings contains 70 papers presented at the American Society of Civil Engineers Specialty Conference Coastal Engineering Practice '92 held at Long Beach, California,...
Evaluating Spillway Adequacy
More than a third of all dam failures are caused by overtopping. Equipment malfunctions or operations errors are sometimes to blame, but the principal cause is inadequate spillway capacity....
Better Cover-Ups
Designing the final cover for a solid waste landfill or remediation site is often trickier than designing its lining because a cover will undergo more unpredictable stress and distress...
Urban Development on Alluvial Fans
An increasing number of developments has been planned in areas subject to flood hazards. To protect developments from flood damage and to prevent accumulated negative effects on floodplains,...
Risk Analysis in Water Resources Engineering: Development and Application
Traditional engineering approaches for evaluating safety and performance in technical projects are usually based on conceptual modeling and the application of engineering standards. Risk...
Reliability of Controlled Structures Subject to Real Parameter Uncertainties
This paper presents a systematic and probabilistically consistent approach for determining the likelihood that instability will result from the uncertainty inherently present in a controlled...
Effect of Active Control to Structural Reliability
Most available results in the study of structural reliability deal with idealized mathematical representation of structures. With model supported diagnosis of the structural condition...
Low-Cycle Fatigue Prediction for Ramberg-Osgood Type Materials
The prediction of low-cycle fatigue crack growth is successfully made by an equation employing the J-integral range. This equation, originally proposed by Dowling and Begley, is analogous...
Optimizing Economic Returns in Drainage Design
Soil wetness is a limitation to high agricultural productivity in Northern New York (NNY) where some 325,000 ha of cropland require drainage treatment. Drainage is needed for trafficability...
Stochastic Analysis of Seasonal Hydraulic Conductivity
Infiltration data collected by a ring infiltrometer tests, for summer, fall, and spring seasons, were used to determine hydraulic conductivity using Philip's two-term infiltration equation....
Stabilizing Drop Structure by Drainage Modifications
East Drain Terminal Drop Structure is located in East Drain, an open toe drain of Palmetto Bend Dam, in the tide water area of south Texas. The drop structure was threatened by piping...
Agricultural Drains and Safety of Dams
Bonny Dam is located in east central Colorado on the South Fork Republican River. The dam's foundation is in the relatively porous Ogallala formation. Throughout the history of the dam,...
Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....
Technology Transfer for Projects in South America
Engineering services were provided for three projects in South America. One project was located in the Pampa Region of Argentina and two others in northern Brazil. The projects were: 1)...
Return to search