Combined Analytical/Numerical Approaches to Solving Fluid Flow Problems in the Unsaturated Zone at Yucca Mountain
Various analytical and numerical approaches are presented for the study of unsaturated flow processes in the vicinity of the Yucca Mountain, Nevada, the proposed site of an underground...
An Investigation of the Mechanical and Hydrologic Behavior of Tuff Fractures Under Saturated Conditions
The mechanical and hydrologic behavior of natural-fractures in a partially welded tuff rock were investigated. Tuff cores, each containing part of the same natural fracture oriented subparallel...
Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....
Modeling of Coupled Heat-Mass-Stress Effects in Geologic Media
To investigate the importance of coupled hydraulic-thermal-mechanical processes for the potential nuclear waste storage repository at the Yucca Mountain, a computer code is being developed....
Fluid Line Deployment and Repair for Space Station
Deployment of the utility system for providing services to the NASA Space Station Freedom provides a unique challenge in design and material technology. The system must be lightweight,...
Post-MECO Propulsion System Requirements for Placement of an STS External Tank in Low Earth Orbit
This paper discusses the findings of a series of computer simulations carried out at the National Institute of Standards and Technology to investigate the requirements for powered flight...
Effects of Initial Conditions on Large Space Structures
Effects of initial conditions of axial deformation (length) and attitude (pitch) angle have been investigated on the subsequent orbital motion, attitude (librational) motion, and axial...
Fluid Behavior Considerations for Waste Management in Low-Gravity Environments
Design of waste recycling systems for spacecraft requires a knowledge of fluid behavior in microgravity. As gravity is reduced, phenomena usually ignored in the One-G environment of earth...
Design Considerations for a Ceramic Fabric Radiator
The design of an Advanced Ceramic Fabric (ACF) thermal management device for use in both interplanetary and near-earth space must consider several important aspects of the environment....
Identification of Aquifer Parameters in Confined Groundwater Flow
The logarithm of the aquifer properties, log transmissivity (log T) and log storativity (log S), are regarded as realizations of stochastic processes whose estimates are required. The...
Flownets by Computer Graphics
A new method of drawing flownets for determining seepage losses in earth dams is developed. The flow and equipotential lines are drawn by modifying W. Kinzelbagh's method....
Flow Separation of Currents in Shallow Water
Flow separation of currents in shallow coastal areas is investigated using a boundary layer model for two-dimensional (depth-averaged) tidal flow past an elliptic headland. If the shoaling...
Calibration of a Transport Model Using Halocarbons
A field study was conducted during April 1987 in which the concentrations of volatile halocarbon tracers, discharged from two existing outfalls, were measured throughout Boston Harbor...
Comparison of Computed and Observed Velocities at Three Estuarine Sites
The Generalized, Longitudinal-Vertical Hydrodynamic and Transport model (GLVHT) has been applied to the Patuxent River estuary, the Raritan River Estuary and the Arthur Kill. The applications...
Flexible Pipe Design Revisited
An overwhelming soil factor in the Iowa formula and random deformations at installation affords soil a prominent role in flexible pipe; this, together with a maximal deflection rule make...
Education and Continuing Development for the Civil Engineer
Setting the Agenda for the 90's and Beyond
The 1990 Forum Proceedings is a collection of papers that were written to provide a basis for deliberation and conclusions at the ASCE 1990 National Forum on Education and Continuing Development...
A Modern Approach to the Design of Grassed Channels
The design of grassed channels can be based on modern fluid mechanics principles. The resistance to flow in a grassed channel is linked directly to the relative roughness of the flow through...
Annual Flow Variations in the Nile River System
The annual flow series of the Nile River System at some key gauging stations for the period 1912-1988 are presented and discussed. The relatively stable period, pre-1961, has helped establish...
Process-Based Debris-Flow Prediction Method
This paper briefly identifies problems with traditional approaches to debris-flow prediction and presents a simplified process-based model (Williams and others, 1988) to accomplish the...
Rheological Properties of Simulated Debris Flows in the Laboratory Environment
Steady debris flows with or without a snout are simulated in a 'conveyor-belt' flume using dry glass spheres of a uniform size, 5 or 14 mm in diameter, and their...
Return to search