ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Probabilistic Approach to Stress Distributions for Orthotropic Wood Plates
Probabilistic approach to the stress distributions of an orthotropic wood plate is discussed. The stress distributions for the orthotropic elastic media are fully dependent of the material...

Load Resistance Factor Design of Aluminum Structures
Load and Resistance Factor Design (LRFD) is a reliability-based approach to design with uncertainty. It involves the explicit consideration of limit states, multiple load and resistance...

Study on Reliability of Actual Steel Structure Using Measured Data
The measurement of uncertainties was taken on an actually constructed steel structure. The stress and strain of each part of the structure are calculated based on the conditions assumed...

Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...

Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...

Seismic Reliability Analysis for Elevated Pressure Vessels
This paper presents two approaches for assessing the seismic reliability of elevated pressure vessels. A discretized mass mechanical system is used to model the dynamic effects of liquid...

Recent Seismic Risk Studies of Nuclear Power Plants: An Overview
Seismic probabilistic risk assessments (PRA) are conducted to estimate the frequencies of occurrence of severe core damage, serious radiological releases, and consequences in terms of...

Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...

Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...

Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....

Less Bang for the Buck
Blasting rock is practical on job sites with ample space, but on construction sites in urbans or developed settings, contractors are shying away from blasting for several reasons. Noise...

Smoothwall Blasting Planned for the Underground Research Facility at Yucca Mountain
At this time it is not known whether the Exploratory Shaft Facility (ESF) at Yucca Mountain, Nevada will be completely mechanically excavated, completely developed by drilling and blasting...

Incorporating Seismotectonic Data into Seismic Hazard Analyses
A wide range of seismotectonic data are now being incorporated into probabilistic seismic hazard analyses, supplementing the inadequately short historical seismicity record. This paper...

Kinematic Models of Extensional Structures: Seismic Implications
Kinematic models can relate faults of different types and different positions within a single dynamic system and thereby offer the potential to explain the disparate seismic activity characteristic...

Thermal Stability of Zeolitic Tuff from Yucca Mountain, Nevada
Thermal models of the potential repository at Yucca Mountain, Nevada, suggest that rocks near the potential host rock will experience elevated temperatures for at least 1000 yr. In order...

Drill-Back Studies Examine Fractured, Heated Rock
To investigate the effects of heating on the mineralogical, geochemical, and mechanical properties of rock by high-level radioactive waste, cores are being examined from holes penetrating...

The Application of Vertical Seismic Profiling and Cross-Hole Tomographic Imaging for Fracture Characterization at Yucca Mountain
In order to obtain the necessary characterization for the storage of nuclear waste, much higher resolution of the features likely to affect the transport of radionuclides will be required...

Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...

Calibration of High Frequency Pollen Sequences and Tree-Ring Records
Two radiocarbon dated paleoenvironmental records from southern Nevada are being examined with the possibility of correlating high-frequency pollen samples with nearby long-term tree-ring...

Ventilation and Construction Considerations for a High Level Nuclear Waste Repository
The storage of high level nuclear waste in an underground repository presents engineering problems in ventilation, construction methods and plan, and in proposed retrievability. Temperatures...

 

 

 

 

Return to search