Design Considerations for a Ceramic Fabric Radiator
The design of an Advanced Ceramic Fabric (ACF) thermal management device for use in both interplanetary and near-earth space must consider several important aspects of the environment....
Morris Sheppard Dam: A Rational Approach to Stability Analysis
This paper details the excessive foundation piezometric conditions found during a routine five-year inspection, and presents the results of backfigured stability analysis of a critical...
Is There a Future for Vacuum Sewers?
Vacuum sewers collect and transport sanitary sewage using pressure difference rather than gravity as the primary motive force. Compared to conventional gravity sewers, they use smaller...
Microcomputer Financial Planning for Transportation
This paper describes the development, testing, and application of a microcomputer financial analysis model called the Transit and Highway Revenues and Improvement Forecasting Templates...
Dynamic Assignment Modelling with Trips
This paper describes additional ways in which TRIPS models time-varying, or 'dynamic' effects. These include area-wide effects as vehicles move through the network,...
The Chesapeake Bay Hydraulic Model: Construction, Operation and Verification
This paper discusses significant aspects of the construction, operation, verification and testing at the Chesapeake Bay Hydraulic Model which was operational from May 1976 to August 1984....
Flexible Pipe Design Revisited
An overwhelming soil factor in the Iowa formula and random deformations at installation affords soil a prominent role in flexible pipe; this, together with a maximal deflection rule make...
Chaotic Characteristics of Snowmelt Runoff: A Preliminary Study
Chaos, the study of nonlinear dynamic systems, offers a way of observing order in systems previously thought to be random. In this study, we analyze snowmelt runoff from a small watershed...
Waves in a Fluid Mud Layer Flowing Down an Incline
To model the dynamics of fluid mud, lava, or debris with a high concentration of cohesive clay particles, we consider a thin sheet of Bingham plastic fluid flowing down a slope. The Bingham...
Longitudinal Surface Profiles of Granular Debris Flows
Longitudinal surface profiles of granular material flowing down an inclined plane were studied by means of theoretical analysis and laboratory experiments. There are two driving forces...
Structural Control of Ground-Water Induced Debris Flows
A number of case studies have attributed debris flow initiation to the effect of elevated pore pressure from a bedrock ground-water source. Debris flows on slopes underlain by Precambrian...
Land Use Change and Soil Erosion Hazard in the Zambezi Basin
An experimental model for estimating soil erosion hazard in southern Africa (SLEMSA) was linked to a raster based Geographical Information System. Soil erosion hazard maps were constructed...
Experimental Investigation of Density-Driven Hyperconcentrated Flows
Lock-exchange type of laboratory experiments have been conducted in order to evaluate the dynamical characteristics of density-driven hyperconcentrated fluid mud. Fluid mud, confined in...
Resistance Consisting of Both Viscous Force and Dispersive Force
A set of specially designed experiments have been carried for studying the resistance of a flow consisting of water and both fine and coarse particles. The viscous force caused by fine...
A Computational Analysis of Dynamic Interaction of Dam with Reservoir Water and Sediment
A two-dimensional model of porous media is employed to calculate the reduction of the onset hydrodynamic pressure with the bulk modulus of pore water in reservoir sediment. However, the...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
Application of the Generalized Channel Routing Model
Using the linear full dynamic finite difference model the applicability of diffusion and kinematic wave models is investigated. Two dimensionless numbers are suggested for applicable range...
Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...
Comparison of Flush and Chamber Mounted Dynamic Pressure Transducer
Modeling of hydraulic structures often includes the measurement of dynamic pressure fluctuations. The accuracy of the pressure measurements depends upon the geometry of the tap. Flush...
Coronarization of the Autonomous Water pump
The conventional hydraulic pressure multiplier has been successfully used by Belgian technician Robert Houman (1986) to provide a dependable source of water supply to the NATO-base at...
Return to search