Image Analysis of Clay Microstructure
The paper summarises new methods which have been developed to analyse oriented textures in electron micrographs of clay soils, complementary methods using polarising microscopy, and an...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
Displacements in the Soil Near a Tunnel Face Using Centrifuge Tests and Image Processing
Image processing is applied to measurements of the soil for a tunnel model in centrifuge. For this aim a specifical device has been developed on the LCPC centrifuge (Nantes, France) and...
Image Analysis Applied to Geotechnical Engineering
Application of scanning electron microscope and image analyzer to the quantification of grain morphology and microfabric of aged sands is briefly reviewed. Relationships of morphology...
Finite Element Analysis of Slabs-on-Grade Using Higher Order Subgrade Soil Models
Incorporation of the two-parameter, Kerr and Zhemochkin-Sinitsyn-Shtaerman subgrade models into finite element code ILLI-SLAB is described. The two conventional idealizations, namely the...
ICAO's ACN-PCN Method and Aircraft-Pavement Interaction
Multi-wheel gear assemblies of future aircraft are not compatible with pavements rated in the ACN-PCN system given by the International Civil Aviation Organization (ICAO). The Aircraft...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
Pipeline Infrastructure II
This proceedings,
Use of Self-Cementing Fly Ashes as a Soil Stabilization Agent
Fly ash produced in the combustion of subbituminouns coals exhibits self-cementing characteristics that can be adapted to a wide range of stabilization applications. Ash treatment can...
Flyash Stabilization of Tropical Hawaiian Soils
A preliminary study of soil improvement/stabilization of several tropical Hawaiian soils with locally generated high quality flyash admixtures has shown tremendous potential as an economical...
Stabilization of South Texas Soils with Fly Ash
The expansive soils of south Texas have traditionally been stabilized with lime or Portland cement. As an alternative, a class F fly ash was tried to stabilize expansive soils obtained...
Enzyme Enhanced Stabilization of Soil and Fly Ash
The purpose of this research was to determine if enzymes could be utilized to increased the strength and stability of soil mixed with fly ash. Samples were prepared with and without the...
A Study of Engineering Properties of a Clay Modified by Ash and Slag
Fly ash from power plants and slag from steel mills are two industrial solid wastes. These wastes can be utilized as soil stabilizers. In this study, a clay with low plasticity is mixed...
Treatment of Calcareous Expansive Clays
The geology, climatic condition and the environment of extreme disintegration, strong hydration and restrained leaching have a large influence on the formation of expansive clays in the...
Use of Pressuremeter in Mixed Highrise Foundation Design
The pressuremeter has been used extensively for the evaluation of strength and deformation characteristics of the glacial hardpan soils in the design and construction of caisson foundations...
Driven Then Pushed Minicone Tests in a Sand Chamber
For a general knowledge on the Standard Cone Penetrometer test and its uses the reader is referred to the work of Briaud and Miran (1991). For this study (Khalaf and Briaud, 1992) a smaller...
Lateral Loading Curves from Pressuremeter Tests
The large drilled shafts for the proposed Klamath Falls Bridge, which are to be founded in diatomaceous silts, were to be designed to withstand earthquake induced large cyclic loading....
Evaluation of Dilatometer Method to Determine Axial Capacity of Driven Model Pipe Piles in Clay
The flat Dilatometer (DMT) provides a unique approach to estimate the effective stress axial capacity of driven displacement piles in clay. An investigation using this approach was performed...
Verification of Deep Foundations by NDT Methods
Deep foundations are designed using static analysis techniques and the soil strength and structural integrity are then confirmed by static load tests. However, static tests are time consuming...
3-D Deformation Analysis of Pile Groups During Wave Loading
Deformation predictions of pile group supporting one leg of Magnus platform were conducted using the 3-D nonlinear computer program SPLICE (Structure/Pile/Soil Interaction Analysis) and...
Return to search