Code Requirement for Concrete Repository and Processing Facilities
Because of varied uses and performance/safety requirements of concrete for high, medium and low level radioactive wastes, a review of the current ACI 349 Code document was carried out...
Critical Stresses in Nuclear Waste Container Under Normal Handling Conditions
Critical stresses in the pintle, flat tophead, canister shell, the bottom plate and in the weldment of a high level nuclear waste canister are evaluated under a variety of static and dynamic...
Influence of Deterministic Geologic Trends on Spatial Variability of Hydrologic Properties in Volcanic Tuff
Hydrologic properties have been measured on outcrop samples taken from a detailed, two-dimensional grid covering a 1.4 km outcrop exposure of the 10-m thick nonwelded-to-welded, shardy...
Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...
Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...
Development of 3-D Lithostratigraphic and Confidence Models at Yucca Mountain, Nevada
Computerized three-dimensional geologic models of potential high-level nuclear waste repositories such as Yucca Moutain, Nevada, are important for visualizing the complex interplay of...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Effects of Core Sealing Methods on the Preservation of Pore Water
Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention...
Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...
Single-Hole in Situ Thermal Probe for Hydrothermal Characterization at Yucca Mountain
The REKA thermal probe method, which uses a single borehole to measure in situ rock thermophysical properties and provides for efficient and low-cost site characterization, is analyzed...
A Formal Communication Process: Pathway to Improved Policy Making
This paper will examine the efforts made and the steps taken by the U.S. Department of Energy's Office of Civilian Radioactive Waste Management (DOE/OCRWM) to establish and keep open lines...
Two-Way Communication: A Case Study in Improving Public Interactions
Successful public interaction requires several key elements. They include: a non-intimidating forum for exchanging information, two-way communication, advance preparation to identify what...
Using an Engaging Approach to Products to Help Create Long-Term Credibility
A long-term, thorough and engaging public information products plan is essential for supporting interaction between Nevadans and the scientists and staff on the U.S. Department of Energy...
Yucca Mountain Student Tours: Response, Reactions, and Results
In March of 1991, the Yucca Mountain Site Characterization Project (YMP) began providing monthly tours for the general public to visit the Yucca Mountain site. The goal of these tours...
Earthquakes and Nuclear Waste: A Lesson in Media Relations
The Little Skull Mountain earthquake on June 29, 1992 marked the beginning of a challenging period for the U.S. Department of Energy's (DOE's) Yucca Mountain Site Characterization Project's...
Cultivating Public Involvement: Going Beyond the Nuclear Waste Policy Act
Congress, recognizing that States, Indian tribes, and local governments have a unique and vested interest in the siting of high-level radioactive waste facilities, gave these parties special...
A Public Involvement Planning Model for the Civilian Radioactive Waste Management Program
Substantive and early involvement of affected governments, interested parties, and the public in the decisionmaking process of the Office of Civilian Radioactive Waste Management (OCRWM)...
The Swedish Dialogue Project. An Attempt to Explore How Different Actors May Take Part in the Decision Process Related to Disposal of Radioactive Waste
The Swedish Nuclear Power Inspectorate (SKI) has initiated a project, DIALOGUE, which is exploring the possibility to define review procedures for license applications of nuclear waste...
Nuclear Fuel Waste Disposal: The Canadian Consultative Approach
Over the past two decades society has demanded more public participation and public input into decision-making by governments. Accordingly, development of the Canadian concept for deep...
An Inverse Procedure for Estimating the Unsaturated Hydraulic Conductivities of Volcanic Tuffs
A procedure is developed for estimating the hydraulic conductivity function of unsaturated volcanic tuff, using measurements of the sorptivity and capillary pressure functions. The method...
Return to search