Field Measurements of Tensile Forces on a Spherical Dome Sector Caused by Internal Load of a Granular Product in Storage
Using a number of existing equations developed application to silos, bins, and hoppers, the horizontal load resulting from the stored product can be calculated. In this paper, the physical...
AWS versus AIJ Tubular K-Connection Design Rules
Among various existing design rules for circular tubular connections, the AWS rules are compared with the AIJ rules because of differences between the two. Subjects of discussion include...
The Behaviour and Design of Stressed-Arch (Strarch) Frames
The paper presents an overview of the stressed-arch structural system and the associated research program undertaken at the University of Sydney between 1988 and 1992. The objectives of...
Design of Half-Through or Pony Truss Bridges Using Square or Rectangular Hollow Structural Sections
The initial part of this paper will outline some of the research, testing, and investigation which has been done on half-through truss bridges. This research is primarily concerned with...
Spherical Domes Subjected to Horizontal Earthquakes
The purpose of this paper is to get a powerful tool for response analysis of a spherical dome subjected to dynamic excitation based on mathematical analytic method, i.e., the Galerkin...
Seismic Behaviour of Tall Guyed Telecommunication Towers
This paper presents results of a detailed numerical modelling study of two guyed telecommunication towers subjected to seismic excitation: a 107-m (350 ft) tower with six stay levels,...
Damage Prediction in Reinforced Concrete Structures under Cyclic Loading
Assessment of the stiffness, resistance and damage behaviour of reinforced concrete members under high cyclic loading due to earthquake actions must consider material nonlinear effects...
Blast Demolition of Reinforced Concrete Industrial Chimneys
On some of recently demolished chimneys, transient measurements were taken, in the vicinity of the tilting hinge, during the process of falling down. Thus, corresponding dynamic computational...
Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...
Imperfections and Thin-Walled Bars Behaviour
Experimental and theoretical observations allowed us to present some new conclusions concerning the proper, and safe designing of the structures composed of thin-walled bars (TWB). These...
Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...
Structural Tests on the Suspen-Dome System
The 'suspen-dome' system, which the authors have developed, consists of a single-layer truss dome and a cable structure. The present paper deals with the results of structural tests conducted...
Large Deformation Analysis of Lattice Truss Structures Including Hysteretic Material Behavior
A methodology is presented to analyze lattice truss structures including both material and geometric nonlinearities. Modeled member material behavior modes include: buckling, yielding,...
Ultimate Loading Capacity of Braced Domes
The stability behaviors of a practical latticed dome with 40 metres span are studied in this paper. The geometric and material nonlinear behaviors, as well as the effects of the initial...
Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...
Experimental Study on the Strut Type of Cable Net Membrane Structures
In this paper a new type of suspension membrane structure combined with a cable net is proposed, in which the supporting struts are arranged between the membrane surface and the cable...
Helium-Supported Hangar for a Small Solar-Powered Airship
For the IGA Expo '93 the Institute for Statics and Dynamics of Aerospace Structures, University of Stuttgart, together with Stuttgart Solar e.V. developed a solar-powered airship. For...
Wall Relief and Three Dimensional Suspension Sculpture Utilizing Tension and Membrane Structures
The aesthetic concerns and observations on sculptural forms involve tension and membrane structures. In the following discussion, the textile forms, which strongly influenced the more...
Current State of Development and Future Trends in Employment of Air-Supported Roofs in Long-Span Applications
Considered here is the low-profile, long span air-supported roof, as opposed to the high-profile 'bubble' variety, which has seen a substantially different development and expectation....
The Use of ETFE Foils in Lightweight Roof Constructions
ETFE foils are polymer film sheets which are enclosed in support frames and inflated to provide stable, insulated and transparent roof cushions for lightweight enclosures. This paper describes...
Return to search