Freeboard Allowances for Chute Spillways
Allowances must be made for the physical phenomena which cannot be modelled, such as wave action, air bulking, splash and spray; the simplifications of behaviour implicit in the calculations;...
Computerized Measurement of Turbine Flow and Performance, Including Penstock Protection
The application of computer technology now makes it possible to measure turbine flows accurately, reliably and economically. The measurement is based on the differential pressure produced...
Columbia River Treaty Perspectives
The Columbia River Treaty was signed in 1961 and ratified by the governments of Canada and the United States in 1964. The Treaty required British Columbia to construct three large storage...
Characteristics of the Roesel Machine Used for Small Scale Hydro/Wind or Sea Wave Electric Power Generation and Storage
An electrical machine with property of synchronous as well as asynchronous characteristics and based on ceramic magnet programming technology by continuous printing of the desired number...
Model Studies for Potential Modification of Pardee Spillway
East Bay Municipal Utility District, a public water supply agency in the San Francisco Bay Area, is examining the spillway adequacy of its primary water supply reservoir. Flood routing...
Fretting Corrosion on Large Split Thrust Bearing Runners
In the early fifties interfacial slip was measured on laboratory models. Design improvements, resulting from these tests, were incorporated into later machines. These improvements appreciably...
Compaction Characteristics of Roller Compacted Concrete
This paper describes a fundamental study on the compaction characteristics of Roller Compacted Concrete (RCC) in the fresh state during vibration through a laboratory test and a field...
A Stochastic Seismological Model in Earthquake Engineering
Recent studies of source mechanisms and wave propagation models enable one to generate strong motions based on deterministic source and source-to-site characteristics. The normal mode...
Autoregressive Model of Spatially Propagating Earthquake Ground Motion
An autoregressive random process model was used to investigate a simulation method of spatially and temporally variative ground motion when characteristics of motion are prescribed by...
Effect of Air Gap on Platform Reliability
A simplified reliability study of the effect of lateral wave forces impacting the deck of a fixed platform is presented. The reliability of the deck legs, considered the primary resistance...
Towards a Better Simulation of Sea States for Modelling of Coastal Structures
In the last fifteen years, techniques of wave generation have advanced to such an extent that it is now possible to exercise controls of parameters such as wave grouping, wave asymmetries,...
Reef Breakwater Response to Wave Attack
A method of predicting stability of a class of low-crested rubble mounds referred to as reef breakwaters is presented. Findings are based on a study which included an extensive series...
Rock Armouring to Unconventional Breakwaters: The Design Implications for Rock Durability
This paper identifies the need for quantitative durability testing of rock for use on dynamically stable rock armored slopes. The derivation and use of a suite of engineering tests for...
Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...
Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...
Performance of a Berm Roundhead in the St. George Breakwater System
A new harbor under construction on St. George Island in Alaska's Bering Sea is using the berm breakwater concept for protection from wave attack. Three breakwaters are included...
Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Arctic Coastal Processes and Slope Protection Design
Cold regions present special challenges for civil engineers. The papers in this book address arctic coastal processes and slope protection design. The first part of the book focuses on...
Return to search