Urban Storm Drainage Design Hydraulic Principles
Chapter 6 of the manual on Design and Construction of Urban Storm Water Management Systems discusses the hydraulic principles and equations under which drainage system structures must...
Automatic Control of a Sewage Interceptor
This paper presents a control system for the automatic operation of a sewage intercepter with control gates to reduce sewage discharge to the receiving waters. One of the issues of the...
Design Program for Gravity Sanitary Sewers
The Gravity Sewer Design Program Version 2.1 M (GSDP2M) performs the hydraulic design for a conventional gravity sanitary sewer network. GSDP2M is written in standard Fortran 77 for batch...
Drainage Design Criteria: Too Restricted? Too Broad? Too Outdated?
Should drainage design policies be more flexible, leaving the field more open to engineering judgment? Are some policies too loose or broad? Should design criteria more closely reflect...
An Expert System for the Planning and Design of Flood Control Channels
The planning and design of flood control channels often calls for the evaluation of a unique set of physical conditions which do not lend themselves to standard designs. Consequently,...
Challenges in Planning and Design of Drainage Facilities for the Orange County Toll Roads
The Orange County Toll Roads project is a program which includes three modern, high-capacity, limited access highways; the Foothill, San Joaquin Hills and Eastern Transportation Corridors....
Urban Drainage Design Potpourri: Avoiding Pitfalls
In the process of mastering various methods or programs used to estimate storm runoff and flow rates, fundamental principles can be overlooked or even misunderstood. Discussed herein are...
Summary of the National ASCE Task Committee on Costs-Benefits of Various Design Frequencies for Urban Drainage Systems and Flood Control
The National ASCE Task Committee on: 'COSTS-BENEFITS OF VARIOUS DESIGN FREQUENCIES FOR URBAN DRAINAGE SYSTEMS AND FLOOD CONTROL' recommends that public officials...
Applying Benefits-to-Costs Analysis for Stormwater Improvement Projects
Benefit-to-cost analyses provide a measure of evaluation for the justification, selection, and prioritization of stormwater improvement projects. Facing increased competition for tax dollars...
Emerging Markets for System Engineering
System engineering provides a double edged sword for those involved in water resources development and management. The tools used in the analysis and development of complex water resource...
Diagnostic Options for Pipeline Rehabilitation
The various diagnostic options utilized for solving pipeline problems/failures continue to increase at a very rapid pace. Field reconnaisance and/or man-entry of pipelines is becoming...
Methods for Designing Hydraulic Aquifer Remediation Techniques
This paper reports on recent research to develop methods for accommodating uncertainty in designing hydraulic remediation systems for contaminated aquifers. The methods rely respectively...
Adaptive Control of Groundwater Hydraulics
Adaptive control has been extensively applied in industrial settings for the control of unknowns systems, systems with uncertainty in the parameters. The approach is recursive, the response...
The Use of GIS in the Study of Water Resources
GIS is becoming an increasingly important tool to the water resource plannar and manager. However, in order to integrate GIS effectively into this field, current and future hydrologists...
A Control Method for On-Demand Operation of Open-Channel Flow
This paper proposes a control system for the automatic operation of an open channel having upstream and downstream gates. The main issue is the use of a discrete-time algorithm which computes,...
Computer Modeling as a Tool for Selecting Appropriate Air Valves for Pipeline Surge Protection
Waterhammer in water or wastewater pipelines is caused by events such as a pump power failure and can have potentially damaging effects on the pipeline or pipeline hardware. In particular,...
A Comprehensive Algorithm for Network Calibration
An explicit calibration algorithm is proposed which provides the direct and rapid adjustment of the pipe roughness coefficients and junction node demands that exactly meet a specified...
Characteristics of Flow Over the Bucket with Gradually Varied Curvature
The bucket of a high spillway dam or a spillway tunnel is one of the parts that easily to be damaged by cavitation. A new type of bucket curve was suggested with gradually varied curvature...
Optimal Control Configuration for Active Control of Structural Vibrations
An active tendon control mechanism is used to control the vibrations of a bridge-like structure. A single control force controls three modes of vibrations. Special attention is paid to...
Thermal Effects in a Transient Study of Fracture
Studies, e.g. Zehnder and Rosakis (1989), indicate that fracture is associated with temperature rises in inelastic zones near the crack edge. To gain more insight into this phenomenon,...
Return to search