Use of High Strength By-Product Gypsum Bricks in Masonry Construction
A new research aimed at producing high strength masonry bricks to be bonded with several types of joint materials other than conventional cement mortar, is introduced in this paper. This...
Use of CLSM Fly Ash Slurry for Underground Facilities
This paper presents the results of research performed in developing and using flowable fly ash slurry which falls under the classification of Controlled Low Strength Material (CLSM) as...
Computer Vision Techniques for Comparing Laser Doppler Velocimeter Scans of a Vibrating Plate to Analytical Plate Modes
Computer vision procedures were applied to velocity images of a vibrating square steel plate. A scanning laser Doppler velocimeter (LDV) measured the images of low frequency resonant operating...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
Lime Treatment of Asphalt Mixtures in Improving Resistance to Moisture
Airport flexible pavement is susceptible to moisture damage. Lime treatment of asphalt pavement is considered to be an effective method in improving resistance to moisture. It has been...
New Opportunities Offered by Cable Systems
After a brief summary of the first cable systems installed in cities, and the fundamental principles which determine their use; the advantages of these systems are addressed compared with...
Automated Design of the Steel Box Girder Guideway for the Kuala Lumpur Downtown People-Mover
Design of the Kuala Lumpur (KL) Downtown People-Mover had to be accomplished on a fast-track schedule. The system contractor assembled a team of experts from North America and Malaysia...
Quality Control: Bridge Steel Fabrication and Erection
This paper examines the Quality Control Program Plan (QCPP) developed by Frederic R. Harris, Inc. (FRH) for fabrication and erection inspection of over 5,448,000 kg of AASHTO Fracture...
Drilling with Direction
Norfolk, Va.'s 48 in. diameter raw water main crosses three rivers in its 52,000 ft route. At the Elizabeth River, an aerial or subaqueous crossing was not feasible, so a...
All Dressed Up
Its location at 660 Madison Avenue will put the new home of clothier Barneys New York in the heart of Manhattan's exclusive midtown shopping district, but the $120 million...
Flyash Stabilization of Tropical Hawaiian Soils
A preliminary study of soil improvement/stabilization of several tropical Hawaiian soils with locally generated high quality flyash admixtures has shown tremendous potential as an economical...
Lime Sludge Amended Fly Ash for Utilization as an Engineering Material
Sludges generated from various water treatment operations are predominantly subject to the fate of land disposal. To prepare sludges for land disposal typically requires time consuming...
Use of Pressuremeter in Mixed Highrise Foundation Design
The pressuremeter has been used extensively for the evaluation of strength and deformation characteristics of the glacial hardpan soils in the design and construction of caisson foundations...
Verification of Deep Foundations by NDT Methods
Deep foundations are designed using static analysis techniques and the soil strength and structural integrity are then confirmed by static load tests. However, static tests are time consuming...
Perimeter Load Transfer in Drilled Shafts in the Eagle Ford Formation
Results of six full-scale compression loading tests at four sites in the Dallas area are considered. Compressive strengths (qc) of the rock varied...
On the Elasto-Plastic Behavior of an Unsaturated Silt
Due to technical difficulties related to the control and measurement of the suction in unsaturated soils, few experimental data on the mechanical behavior of those soils exits. The paper...
Composite Materials as Concrete Reinforcement in the Next Decade
Polymer matrix composites (PMCs) are researched for possible implementation in the construction industry. A number of factors affect the widespread use of FRP composites in the civil engineering...
Bringing Finance to the Table
Advice for companies whose marketing efforts have won them overseas projects�with the condition that they arrange financing for those projects. The competition for the few projects funded...
Composite Construction in Steel and Concrete II
Composite steel-concrete structures are widely used throughout the world. Applications range from buildings to bridges to foundations to special structures. In many instances extensive...
Strength Design for Reinforced-Concrete Hydraulic Structures
Return to search