How to Include Reliability Constraints in Structural Optimization
Structural optimization is a complex process made of design cycles aimed at finding the best possible solution. At each design cycle ultimate and/or serviceability limit states must be...
Structural Analysis for the Student
The transition from student to practicing structural engineer can be a very 'eye-opening' experience. From the classical right-wrong classroom solutions of well-defined indeterminate structures,...
Software Applications for Monitoring Instrumentation Data
The initial program for reducing instrumentation data, used by the Geotechnical Branch of the Louisville District Corps of Engineers, was written in 1969. This program did not allow for...
Evaluation and Rehabilitation of Relief Wells
The U.S. Army Engineer District, Vicksburg has developed an expedient method of rehabilitating arrays of large numbers of gravity flowing relief wells located along the toe of dams using...
General Design and Construction Considerations for Remedial Seepage Control
All earth and rock-fill dams are subject to seepage through the embankment, foundation and abutments. Methods for remedial seepage control include storage restriction, grouting, upstream...
Development of High Performnance Shotcrete (Theoretical Considerations)
This paper presents some theoretical considerations for studies on high performance wet-mix shotcrete. A new laboratory shotcrete pump and rheometer are being developed to study the effects...
A Comparative Study of Different Steel Fibers in Shotcrete
Two steel fiber reinforced shotcrete (sfrs) test programs have been carried out in eastern Canada using steel fibers which are available in the north American marketplace. The first program...
Shotcrete for Underground Support V
This proceedings consists of papers presented at the Engineering Foundation Conference held in Uppsala, Sweden on June 3-7, 1990. They are divided into sections concerned with the design...
A Computer-Generated Film of Repository Operations
For the past fifteen years, the same types of questions concerning nuclear waste repository operations have kept coming up over and over again. What should be the average throughput for...
Modeling Gas and Brine Migration for Assessing Compliance of the WIPP
The U.S. Department of Energy (DOE) is developing the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico as a facility for the long-term disposal of defense-related transuranic...
Application of Monte Carlo Neutron Photon to Hanford Waste Vitrification Plant Design Analysis
The Monte Carlo Neutron Photon (MCNP) computer program ('MNCP - A General Monte Carlo Code for Neutron and Photon Transport, Version 3A') (in PC and mainframe versions) has been used for...
Heat and Vapor Transport Beneath an Impermeable Cap
Vadose-zone moisture transport near an impermeable barrier has been under study at a field site near Albuquerque, NM since 1990. Moisture content and temperature have been monitored in...
Discrete Feature Modelling at the Stripa Mine in Sweden: Significance for Hydrologic Modelling of Fractured Rock Masses
The third and final phase of the Stripa Project included a series of characterization efforts, predictions, and validations to determine the viability of discrete-fracture groundwater...
AREST: The Next Generation
Simple mass transport models using constant boundary conditions at the waste form surface and at the host rock boundary do not always results in realistic predictions of the performance...
WAPPA Modeling of Post-Emplacement Performance of the AECL HLNW Package
Environment Canada (EC) is anticipating, in the near future, a review of the EIS document released by AECL which addresses the performance of their HLNW disposal concept. This paper presents...
Maximum Individual Risks from Transported Spent Nuclear Fuel
The computer code TICLD (Transportation Individual Center Line Dose) is used with the computer code RADTRAN 4 to calculate maximum individual dose and risk from transportation accidents...
Drift Emplaced Waste Package Thermal Response
Thermal calculations of the effects of radioactive waste decay heat on the potential repository at Yucca Mountain, Nevada, have been conducted by the Yucca Mountain Site Characterization...
Waste Packager and Areal Power Density Approximator (WPA3) Computer Code
A microcomputer-based computer code called Waste Packager and Areal Power Density (APD) Approximator (WPA3) has been developed to compute waste package inventories and track individual...
An Assessment of Coupled Thermal-Hydrologic-Mechanical-Chemical Processes
A literature review was conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant...
Studies of the Role of Fault Zones on Fluid Flow Using the Site-Scale Numerical Model of Yucca Mountain
The three-dimensional grid of the site-scale model developed for the unsaturated zone at Yucca Mountain was used to perform two-dimensional simulations with the TOUGH2 computer program....
Return to search