Computerized Operation Models of Oroville Reservoir
Two monthly computer operational models, OROTHM1 and OROTHM2, were developed to provide more detailed operation and maintenance studies for the Oroville facilities. Currently another computer...
Hydro Combine Option for Lakhwar Project
A new concept of providing a power house cavity inside the traditional gravity dam section has been explored. Preliminary investigations indicate that taking into account all the relevant...
The Impact of Inlet Flow Characteristics on Low Head Hydro Projects
This paper discusses the intake civil designs, addressing head loss and flow distribution into the turbine intake. The impact of poor flow quality on head losses, turbine performance,...
Computer Aided Design of Butterfly Inlet Valves
Computer simulation of butterfly inlet valves (throughflow, lattice) in hydropower schemes is presented. The software is intended for practisting engineers to obtain significant parameters...
Tracer Dilution Flow Measurement Application to Short Penstock Length
Absolute performance evaluation of hydro-turbines requires the determination of flowrates. Flow measurement is probably the most difficult aspect of determining a unit's efficiency....
Programmable mMicroprocessors in Local Control of Hydro Power Plants
The main purpose of the control equipment is to provide the generator with means for operation of the power station equipment. There is a need for status information on the generating...
Pull-Out Response of Geotextiles and Geogrids (Synthesis of Available Experimental Data)
During the past 15 years, there has been a considerable growth in the use of various materials to reinforce soils. The rapid development of geosynthetics and their increasing use in soil...
Controlled Yielding of the Lateral Boundaries of Soil Retaining Structures
Lateral expansion of conventional or reinforced soil backfills is necessary to establish and maintain the minimum lateral stresses on soil retaining structures. Laboratory studies are...
Mechanisms of Subsidence Induced Damage and Techniques for Analysis
Structural damage due to mining induced subsidence is a function of the nature of the structure and its position on the subsidence profile. A point on the profile may be in the tensile...
Frequency Domain Site Response with Pore Pressure
A frequency domain analysis for seismic site response and liquefaction potential is developed. The analysis is based upon a nonstationary random vibration theory. The model uses an effective...
Probabilistic Prediction of Pile Group Capacity
A reliability analysis of a group of free standing piles in clay is carried out using Monte Carlo simulation. The pile material strength, soil capacity, and the load on the pile group...
Modeling Fatigue Crack Growth Resistance, dN/da
In the fracture mechanics approach to fatigue, da/dN is correlated with the cyclic range of the stress intensity factor, ?K; the resulting relation, da/dN=f (?K), is commonly called the...
Probabilistic Prediction of Mixed Mode Fracture Initiation and Trajectory Under Random Stresses
Methods are developed for estimating crack trajectory and the probability of crack initiation in mixed mode fracture. The analysis is based on a computer program for deterministic fracture...
Fatigue Reliability and Inspection in Redundant Structural Systems
The reliability of redundant structural systems under fatigue including updating by inspection is studied using two different formulations, i.e., the stress intensity space and the crack...
Prediction of Concrete Creep and Shrinkage by Sampling on the Basis of Correlated Random Material Parameters
There are many random parameters which influence creep and shrinkage of concrete. In all of the previous probabilistic studies the parameters are assumed to be mutually independent random...
Reliability Based Analysis of Contact Problems
The S.B. Batdorf model is modified to include the reduction in shear due to the effect of compressive stresses on the crack face. This new formulation was used to obtain the probability...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
Bridge Repairs?Unexpected Effects on Reliability
There is a significant probability that a bridge will require repairs at some time during its service life. Repairs correcting one deficiency can cause other, unanticipated problems. Awareness...
Endochronic Theory and Non-Llinear Stochastic Dynamics of 3-D Frames
Analytical continuous expressions of the material constitutive law are required by equivalent linearization techniques in nonlinear stochastic dynamics. Extensions to study 3D frames,...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Return to search