Bearing Pressure?SPT Correlations for Expanded Base Piles in Sand
Design of enlarged base piles is usually carried out using correlations between SPT N values and point resistance. The results of full scale load tests are used to show that base resistance...
Some Observations on Undrained Side Resistance of Drilled Shafts
A data base of 106 field load tests (65 in uplift and 41 in compression) is used to evaluate the undrained side resistance of drilled shaft foundations. The total stress or alpha (?) method...
Analysis of Drilled Shafts in a Deep Fill
A deep fill of varying thickness will settle with time and will also exhibit a horizontal component of movement. Drilled shafts that are installed in the fill to support a structure must...
Special Bedrock Conditions and a Foundation Project in Greater Boston
In the greater Boston area the argillite bedrock and/or the overlying glacial till provide suitable support for a wide range of foundation systems, including high capacity end-bearing...
Thoughts on the History and Current Practice of Foundation Engineering in North America
With the publication of 'Erdbaumechanik' in 1925, the behavior of soils was explained in terms of numerical physical properties and the principles of what became...
Selected Papers from Chinese Journals of Structural Engineering
This book is an initial effort to introduce selected papers from journals published by the China Civil Engineering Society to ASCE membership. The twenty papers in this volume were selected...
Seismic Engineering
Research and Practice
This volume of Seismic Engineering: Research and Practice contains papers from twenty-two sessions of the 1989 ASCE Structures Congress. These papers represent a wide-ranging interest...
Structural Design, Analysis and Testing
This volume contains the papers presented in 21 sessions of the 1989 Structures Congress held in San Francisco. The papers cover a wide range of topics including types of construction...
The Water Erosion Prediction Project: Erosion Processes
The erosion process on hillslopes is conceptualized in the USDA Water Erosion Prediction Project (WEPP) as being divided into rill and interrill processes. Rill detachment occurs when...
Friction Slope Computation for Mathematical Models
The behavior of the energy flow gradient as function of depth and velocity is analyzed for three flow resistance methods. In the paper, the necessary modifications introduced to the methods...
Comparison of
Manning's n values were determined for three stream channels in two complex watersheds in North Mississippi. The study covered a wide range of channel conditions and flow...
Derivation of a Stability Principle from the Shields Criterion
The widely used specific energy equation, which defines the subcritical and supercritical states of the open channel flow, is a direct result of the integration of the Froude number corresponding...
Mathematical Models for Turbulent Shear Stress in Sediment-Laden Flows
Turbulent shear stress in sediment-laden flows has been examined by several investigators including H.A. Einstein and N. Chien A. Zagustin and J.C. Willis. Three derivations resulted in...
Towards a Distinct Treatment of Incipient Motion for Bed Forms of Low Regime
The principle methods for estimating the incipient particle motion on developed bed forms in the lower regime are compared with each other. Usually only a part of the total wall shear...
The Beginning of Sediment Transport as a Probability-Problem
Sediment transport only takes place when the action of flow (shear stress, velocity) exceeds a critical value. The limit between rest and movement can be given as critical flow velocity,...
Critical Shear Stress of Armour Coat
The problem of the determination of the critical shear stress of the armour coat is important in sediment transport, river degradation and aggradation and flow discharge regulation. The...
Sediment?Hyperconcentration Flow and Its Similarity Laws
The sediment- hyperconcentration flow are studied theoretically and experimentally, and the formulas for the Bingham shear stress, rigidity coefficient, fall velocity and transport capacity...
Flow Modeling in the Toutle River, Washington
In support of flow, suspended load, bed load, and bedform transport measurements, a quasi-three-dimensional river flow model was adapted to a reach extending from 260m upstream to 30m...
Mechanics of Mud Flows in Curved Channels with Uneven Beds
Most natural debris flows move through paths that are curved and that have significant bed topography. Owing to the dependence of the mechanics of wet debris containing substantial amounts...
Laboratory Analysis of Hyperconcentrations
The physical and kinematic behavior of hyperconcentrations has been reviewed and a summary of recent and past developments in hyperconcentrated flow research is presented. This paper focuses...
Return to search