ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Stability Analysis of Gravity Dam Foundations with Horizontal Seams
Determination of the overall factor of safety against sliding is an important aspect in concrete dam design. Limit equilibrium methods have serious limitations. A method for determining...

Through-Flow Analysis for Rockfill Dam Stability Evaluations
Existing rockfill dams may have spillways that are not adequate to pass the current probable maximum flood (PMF), having been designed prior to the publication of the latest Hydrometeorological...

Laboratory and Field Experience with Cavitation Monitoring of Hydroturbines
When control of cavitation erosion can be accomplished by changes in operating conditions, real-time monitoring of cavitation level is a valuable tool. Three types of cavitation monitors...

Cavitation Noise Investigation of a Pump-Turbine
The results from cavitation noise detection measurements on a 35 MW pump-turbine are presented. Detailed information about the cavitation noise is determined including three-dimensional...

Hydroacoustic Evaluation of Deep and Shallow Spill as a Bypass Mechanism for Downstream Migrating Salmon at Rock Island Dam on the Columbia River
Hydroacoustic data were collected on downstream migrating juvenile salmon (Oncorhynchus spp.) during the springs of 1983 and 1984, and summer 1990 at Rock Island Dam on the Columbia River...

Diagnostic Testing and Repair of Grand Rapids Generating Station's Unit Four
This paper is a case history that discusses diagnosis and correction of a variable pitch propeller type (Kaplan) hydraulic turbine problem. The turbine problem involved fatigue failures...

Large, Monolithic, Weighing Lysimeters
Monolithic lysimeters preserve existing vegetation and soil properties that can be destroyed by excavation and filling. Site preparation for constructing large, monolithic lysimeters includes...

Percolation Lysimeters for Water Quality Sampling
A field method to measure, year-around, the quantity and quality of leachate under irrigated crops has been developed. A specific objective was to evaluate percolation lysimeters as tools...

Hydrologic Impact of Reservoir Filling on a Fractured Crystalline-Rock Aquifer
A study of flow in and recharge to fractured rock has been initiated in conjunction with the construction and filling of a pumped-storage reservoir for a hydropower plant in the Blue Ridge...

An Analytical Technique of Flow Rate Into Perforated Draintubes
The flow rate into a draintube in a saturated soil media depends on numerous characteristics such as the hole size, the number and spacing of holes, the drain size and depth. Based on...

Rainfall-Runoff Characteristics of Rangitaiki and Whirinaki Watersheds
The Rangitaiki and Whirinaki watersheds in New Zealand have considerably higher storage and infiltration rates than others in New Zealand. The Rangitaiki watershed is flat compared to...

Two-Dimensional Analysis of Furrow Infiltration
A general applicable two-dimensional unsaturated-saturated model for transient soil-water flow conditions in heteogeneous soils was developed. The water flow model was applied to simulate...

Influence of Soil and Sediment pH and Redox Conditions on Degradation of Toxic Organics
The presence of toxic organics in soil and sediments has raised concern over persistence and bioaccumulation. In the absence of oxygen, microbial degradation of toxic organics proceeds...

Riprap Design Criteria for the ARS Low Drop Structure
The ARS low drop grade control structure has proven to be an effective means to stabilize incised channels in Mississippi. However, field inspections and laboratory testing have indicated...

Existing U.S. Standards in Hydraulic Engineering
The Task Committee on Recommendations for Standards in Hydraulics confined itself to topics that are used in hydraulic computations or design. Thus numerous standards related to size,...

A Knowledge Based System for Design of Localized Mechanical Mixing Systems
Knowledge-based systems, frequently referred to as expert systems, have been used in a variety of computer-based design applications. They are particularly suited to design processes where...

Automation of a Truck-Mounted Drill Rig
Truck-mounted drill rigs used for soils properties investigation, foundation evaluation, ore exploration, and producing monitor and water wells typically require, because of their weight,...

Effect of Gas Flow on Physical Absorption
Air blowing over a liquid surface can greatly increase the rate of physical absorption of a gaseous component. This increase is associated with the initiation of waves and a change in...

The Soil-Rock Boundary: What is it and Where is it?
A major issue in many areas of Civil Engineering practice is the boundary between earth materials that are defined as soil and those that are defined as rock. Designers, contractors, and...

Problems with Rock Excavation Specification in Alberta
As a result of contract overruns and claims from classification, measurement, and payment for 'solid rock' excavation, Alberta Transportation and Utilities embarked...

 

 

 

 

Return to search