New Concepts in Transmission Line Design
Committees of the American Society of Civil Engineers have been in the forefront on updating design guides to address improved procedures for conventional latticed towers, formed-plate...
New Outlines for 500 kV Transmission Towers Using Cold-Formed Shapes: The Experimental Line of the American Electric Power Research Institute
The use of cold-formed steel members, in electrical transmission towers, is actually a feasible, reliable and economical solution. The EPRI experimental line is an example of the newest...
Sizing Techniques for Lateral Bracing
Techniques for determining the size of lateral bracing members in multi-story steel buildings are presented and discussed. Because the design of such bracing is usually controlled by deflection...
The Design of Diagonal Cross-Bracing
The results of an analytical and experimental study on the behavior of simple and double diagonal cross-bracings in vertical stiffening trusses and in built-up open web beams are presented...
Unistrut Space Frame Systems and Their Application
A review of the application of latticed structures is presented. The design and construction of space frames is dependent upon the availability of adequate connection systems to realize...
Design Issues in Steel Buildings
The Committee on Design of Steel Building Structures of the Committee on Metals of the Structural Division of ASCE was formed in 1981, with the express purpose of studying problems that...
Floor Vibrations ? Tips for Designers
The purpose of this paper is to suggest a number of practical concepts which can be used to improve the performance of floor systems subject to occupant induced motion from either walking,...
Evaluation of the Rotation Capacity of Wide-Flange Beams Using Shell Finite Elements
Numerical simulation can be useful for planning of experimental tests, performance of parametric studies, and achieving an understanding of complex three-dimensional behavior that may...
Stablity Considerations in the New E&CS Building
The new Engineering and Computer Science (E & CS) building at California State University, Sacramento (CSUS) is a five-story structure characterized by two shear walls in the east-west...
Stability Analysis in Bracing and Support Design
A post-buckling stability analysis is carried out for struts with multiple elastic lateral supports. Both hinged-end and fixed-end conditions are considered. A criterion of sufficient...
Lateral Buckling of Beams: General Considerations
The paper presents a solution for the elastic, lateral-torsional buckling of beams under unequal end moments using Worthington's method of superposition of modes involving...
Portal Frame Stability with Nonproportional Loads
An inelastic theoretical study of the effect of various load paths is conducted on the in-plane behavior of an imperfect portal frame with flexible joints. The loading consists of concentrated...
Optimal Shape Design of Columns for Buckling
A procedure for the shape optimization of a column for prescribed buckling load is developed. The procedure uses a new analysis technique that enables the formulation of the optimization...
Optimized Wall Thickness of Shells of Revolution
The aim of this paper was to develop a concept for the design of shells of revolution with different Gaussian curvature using a simplified finite element buckling analysis. A cooling tower...
Frequency Response Design of Controlled Structures
The installation of optimal control systems has been shown to be effective in reducing the vibration responses of structures. In addition to the effectiveness, there are many factors that...
Optimization for Exact Stability of 2-Bar Trusses
This paper is concerned with the structural optimization problem of minimizing the weight of a 2-bar truss subject to nonlinear stability constraints. Optimization problems for stability...
Fourier Series Expansion on Determination of Response Bound of Beam
Fourier series expansion is suggested to discrete the continuous vibrating system by regarding Fourier constants as generalized displacement parameters. The orthogonal merit to the terms...
On the Analysis of Viscoelastic Plane Frames
Since its foundation on 1986 the Computational Mechanics Laboratory at the Polytechnic School of Sao Paulo has often been asked for non-linear stability analysis of wood and concrete structures....
Bermed Shelters Subjected to Accidental Explosions
An investigation of the adequacy of two competing shelter designs to protect the occupants from an accidental explosion in a nearby shelter is described. Two bermed shelters, one of rectangular...
Identification and Characterization of the Collapsing Alluvial Soils of the Western United States
Suggested procedures for the identification and characterization of the collapsing alluvial fan, mudflow and debris flow deposits of the arid and semi-arid parts of the western United...
Return to search