ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

A Three-Dimensional Numerical Simulation of Seasonal Flow and Salt Transport in the C&D Canal
Two seasonal-scale, three-dimensional hydrodynamic models with salt transport using CH3D-WES were constructed to represent the most critical periods of environmental concern: fishery spawning...

Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...

Design of Manning's-Rougness-Coefficient Study in New York State
Field-collected hydraulic data can be used to compute roughness coefficients for channels with different hydraulic characteristics. Suggested criteria for the design of a roughness-coefficient...

Bed Load Roughness in Supercritical Flow
A supercritical concrete channel has been proposed for Mission Creek located in Santa Barbara County, California. The proposed channel could transport gravels and cobbles as bed load during...

A Study on Mathematical Model for Sediment Yield in Mountain Regions with Large Hillside Slopes
Based on the characteristics of water and soil loss in mountain region with large hillside slopes in southwest of China, the equations of runoff formation and sediment yield are obtained....

Analysis of Levee Design in a Mountain River Using Two-Dimensional Flow Modeling
The South Branch of the Potomac River experienced extreme flooding in November 1985. A flood with an estimated return period of 400 years caused $33 million in damage in Petersburg, West...

On Habitat Simulation in Mountain Rivers
Mountain rivers are quite different from other rivers and one of the characteristics that distinguish them from others is the large variation in velocities with time, with location in...

Numerical Model Verification on Tidal Current in Tokyo Bay
Results of a research project to verify the Multiple Level Model for a tidal current analysis in Tokyo Bay are presented in this paper. This study is a part of the subject for the Task...

San Francisco Bay Test Case for 3-D Model Verification
This paper describes a field test case for 3-D hydrodynamic model verification using data from Carquinez Strait in San Francisco Bay, California. It will be disseminated by the ASCE Computational...

Ambrose, R. B.
Numerous three-dimensional hydrodynamic models have been developed in the last two decades. The developers of each model have used their own methods to verify the codes before applying...

PSF-PM Verification of 3D Free Surface Flow Models
This paper reports an application of the Prescribed Solution Forcing (PSF) and Physical Modeling (PM) to the development of a systematic procedure for the verification of three-dimensional...

Identification of A Field Data Collection Program in Delaware Bay
Verification and the subsequent application of a numerical model requires sufficient field data to demonstrate that the model is reproducing the existing hydrodynamics of the modeled system....

3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...

3D Free Surface Flow Model Verification - A Panel Discussion on Test Cases
This paper is to briefly present the objectives and approaches of the Panel Discussion on test cases to be developed for 3d free surface flow model verifications, so that professionals...

A Physically-Based Model of Channel Widening
The application of many existing models of river channel morphology is limited by their inability to account for bank erosion and changing channel width through time. This paper outlines...

Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...

Equilibrium Geometry of Channels with Cohesive Banks
An optimization model is used to assess the stability of gravel-bed rivers with cohesive channel banks and to determine the effect of the bank stability on the equilibrium hydraulic geometry....

Field Evaluation of the Sediment Transport Model Stream with a Bank Erosion Component
The graded sediment routing and stream bed evolution model STREAM of Borah, Alonso and Prasad was expanded earlier by incorporating a riverbank erosion component of Osman and Thorne. In...

Expansion and Contraction of Powder River Between Moorhead and Broadus, MT: Geomorphic Observations and Numerical Modeling
Sixteen years of annual surveys demonstrate that the channel of Powder River expands at high flows and contracts at low flows. Channel contraction is associated with the formation of benches...

Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...

 

 

 

 

Return to search