Reliability of Electric Power Transmission Systems in Seismically Active Metropolitan Tokyo: Part 2. Seismic Hazard Analysis
For studying the seismic reliability of a power transmission system of Metropolitan Tokyo, the seismic hazard analysis of Kanto district was performed based on a three dimensionally distributed...
Reconciliation Between Probabilistic and Deterministic Seismic Margin Analysis Methods
This paper presents a procedure for reconciling the results from the probabilistic and deterministic methods for calculating a high confidence of a low probability of failure (HCLPF) capacity...
Some Insight in Autoregressive (AR) Spectral Modeling
The difficulties associated with the determination of reliable autoregressive (AR) approximations of the Pierson-Moskowitz and Davenport spectra are examined from the standpoint of developing...
Continuous Simulation of Gaussian Processes with Given Spectrum
A new algorithm, to be called MIMA (modulated interpolated moving average) allows stationary Gaussian processes with given spectral density to be simulated in continuous time, while providing...
Towards Reduction of the Vulnerability of Multi-Tank Storage Facilities
Accident scenarios in large scale industrial plants show that conventionally designed multi-tank storage facilities are susceptible to domino effects. With the aim to reduce the probability...
Column Separation in Pumped Pipelines
Pressure transients are common occurrences in water supply systems. Pipeline standards and design/testing techniques will normally provide sufficient protection for transmission and distribution...
Keeping Lifelines Alive
There were no city water supplies to fight the fires in San Francisco after last year's earthquake. The fires were brought under control because of an historic auxiliary water...
Programmatic Challenges and the Value of Testing on the West Valley Demonstration Project's Vitrification Facility Design
The primary objective of the West Valley Demonstration Project (WVDP) is the solidification of approximately 2.1 million liters (560 thousand gallons) of high-level waste (HLW) which resulted...
Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...
Soluble High-Level Waste Decontamination and Disposal at the Savannah River Site
The high-level radioactive waste that has accumulated at the Savannah River Site is stored in large underground steel tanks. Programs to remove the soluble waste from the storage tanks,...
Post-MECO Propulsion System Requirements for Placement of an STS External Tank in Low Earth Orbit
This paper discusses the findings of a series of computer simulations carried out at the National Institute of Standards and Technology to investigate the requirements for powered flight...
Wave Propagation in Hyper-Structures
The concept of hyperelement was introduced by E. Kausel and J.M. Roesset, 1977 in connection with the derivation of the dynamic stiffness matrix for layered continuum problems involving...
Dynamics of Composite Tubes
A displacement-based stiffness method is used to study the characteristics of dispersive wave propagation in laminated composite cylindrical tubes. It is assumed that the tube is composed...
Black Holes
For many years, scientists have searched the skies for black holes; stars even more massive than white dwarves. As of yet, there have been no 100% sure sightings. Since they do not emit...
A Methodology for Optimal Control of Pump Stations
Pumping water to utility customers is an expensive service which consumes large amounts of energy. Most approaches to date require simplifications and assumptions for the specific system...
Curvilinear Long Wave Hydrodynamic (CLHYD) for Tidal Circulation and Storm Surge Propagation
The objective of this paper is to demonstrate the ability of a two-dimensional long wave hydrodynamic model to simulate long wave processes in curvilinear coordinates. The series of tests...
Sounding Out Buried Waste
Geophysical diffraction tomography (GDT) is a new remote sensing technique for quantitative high-resolution subsurface imaging. It is similar to optical holography where long wavelength...
Strides in Nondestructive Testing
Stress wave methods of nondestructive testing are increasingly used in civil engineering applications. Four case histories of the use of different types of stress wave testing are given....
Slips Ahoy
Klancnik discusses the markets for marina construction in the 1990s. The past decade saw a boom in the boating industry and in the design and construction of marinas. The market will remain...
Two-Dimensional Modeling of Overland Flow
Two-dimensional distributed finite element (F-E) and finite difference (F-D) models are developed to simulate storm events on arid watersheds. The F-E model uses the kinematic wave approximation,...
Return to search