ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Determination of In-Situ Stresses From Acoustic Emissions
Acoustic emissions (AE) are microseismic activities that are generated in concrete by cracking and damage. The rate of Acoustic Emissions, called the 'Event Rate', can provide indication...

Evaluating Polymer Concrete Bridge Expansion Joints Using Acoustic Emission
This study is to simulate the acoustic emission (A/E) of polymer concrete bridge expansion joints subjected to controlled representative loads by a rotating test apparatus on a circular...

Modal Coupling Effect of Non-Classically Damping
The equations of motion of a structure in undamped modal coordinates may have non-zero off-diagonal terms in the damping matrix. Although these terms are commonly neglected, studies have...

Nonlinear Dynamic Response of Framed Structures Using the Mode Superposition Method
This paper describes a methodology for nonlinear dynamic response analysis of framed structures using the mode superposition method. A portal frame example is presented and compared to...

Nonlinear Analysis of Strain-Softening Damage under Monotonic and Cyclic Loading
The paper reviews the modeling of damage by the microplane model and presents extensions required for cyclic loading. The general microplane constitutive model is implemented in a three-dimensional...

Automated Identification of Compression-Induced Cracking in Cement Paste
The development of image analysis techniques to identify cracks using scanning electron microscope images of hydrated cement paste is described. Cracks are identified based on both the...

Dugdale Model Applied to Crack Interactions
It is doubtful that modelling crack interactions problem within the context of elasticity adequately reflects the physical aspects as the failure of brittle material is approached. A model...

Contact Induced Damage
Contact induced damage is an important source of potential failure of engineering components. The particular applications where this damage occurs are in the automotive, aerospace and...

A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...

Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...

Evolution of Damage in Brazilian Test Using Holographic Interferometry
A common method for estimating the tensile strength of concrete is the Brazilian Test. The test is carried out by loading a cylinder on its side in diametral compression. Accodring to...

The Theory of Elasticity: 1950-1992 and Beyond: Concluding Remarks
Forty years ago the theory of elasticity could be completely characterized by A.E.H.Love in his monumental treatise as an effort to reduce to calculation the internal state of stress produced...

Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....

Structural Control Under Stochastic Seismic Loads
This paper presents a method of controlling nonlinear and hysteretic civil engineering structures subjected to stochastic earthquake ground excitations. Emphasis is placed on control of...

Properties of Aggregate-Cement Interface for High Performance Concrete
An experimental study of the interfacial zone between aggregate and cement paste was undertaken. Various factors such as type of aggregate, treatment of aggregate surface, mixing process...

A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...

The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...

Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...

Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...

Stability of Systems of Rigid Bodies by Bounding Theorems
The stability of systems of systems of rigid bodies subjected to conservative and dissipative forces is investigated by considering the minimization of a work function subject to the kinematic...

 

 

 

 

Return to search