Dynamic Fracture Toughness of Rail Steels
As new premium alloy rail steels exhibit increased wear resistance and as track lubrication is used, the failure mode for rails is shifting from wear to fatigue. Elastodynamic finite element...
Finite Element Idealization for Linear Elastic, Static, and Dynamic Analysis of Structures in Engineering Practice
This report by the Finite Element Idealization Task Committee is a comprehensive aid for modeling structures for finite element analysis. The first part covers static analysis. Aspects...
FEM-Flow Analysis in Hydraulic Turbomachinery Runners
Finite element calculations of the flow through distributor and runner of hydraulic turbomachines are presented. The method is quasi-3D and inviscid, but the deviations from a potential...
A Thermal Analysis of Pavement Thawing
This research focuses on identifying the spring thawing period for the purpose of timing load restrictions on low to medium volume roads in frost-susceptible areas. Cases evaluated include...
Finite Element Modelling of Cold Regions Concreting
Finite element heat transfer computer programs are discussed in regard to their use in modelling cold weather concreting. The concrete material properties required for input to the finite...
F.E.M. Analysis of Mobile Arctic Caisson Island With Stochastic Material Properties
The paper examines how soil uncertainty influences the short term settlements and stresses of the Mobile Arctic Caisson on the original sea bed. Utilizing a two-dimensional plane strain...
Finite Element Analysis of Concrete Armor Units Subject to Wave Impact
Concrete armor units are commonly employed for the protection of shorelines and rubble structures. Their design is primarily based on hydrodynamic stability. However, their structural...
Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...
Spring Stiffness for Beam-Column Analysis of Soil-Structure Interaction Problems
The objective is to provide a simple means of analytically combining a two-dimensional foundation with a beam-column structure so that the procedure can be used for preliminary design...
Nonlinear Analysis of External Prestressed Bridges
Finite element formulations for analysis of the overall response of concrete bridge girders prestressed with external tendons is described. The analytical procedure includes several nonlinear...
Heterosis Shell Element in GTSTRUDL
The most popular shell finite element is the degenerated solid type, originally formulated to model thick shells. However, in thin shell applications, this element fails by 'locking'....
Dynamic Soil-Structure Interaction by the Boundary Element Method: A Comparison Study
A comparison study of three Boundary Element Method approaches is attempted on the basis of a typical three-dimensional, dynamic soil-structure interaction problem. The vertical transient...
Solving Finite Element Structural Dynamic Problems on Small Computers Using Semi-Explicit Methods
Numerical techniques based on the partial decomposition of a coefficient matrix, are developed for structural dynamic problems. Improved iterative techniques are discussed which could...
Finite Element Discretization for Mixed-Mode Fracture Problems
The finite element discretization of mixed-mode problems in fracture mechanics is investigated. The characteristics of the mesh near the crack affect the accuracy of the finite element...
Response of Eccentrically Braced Tall Buildings
The inelastic dynamic response aspects of tall steel buildings with eccentric K-bracing and eccentric X-bracing systems are examined, when subjected to factored El-Centro and computer...
Predictions of Thermally Induced Stresses in Thin Walled Grain Storage Bins Under Declining Ambient Temperatures
A generalized constitutive equation for cohesionless sands based on elasto-plastic theories is applied to a grain bin system. The validity of the theory is established through the finite...
Tunnel Closure Prediction by Finite Element Method
Discussed is the tunnel closure prediction of a drainage tunnel using finite element methods. Separately, three finite element programs were used to predict the closure. The results of...
Analysis of R/C Slab Under Turbine Missile Impact
Turbine missile impact on reinforced concrete barrier in nuclear reactor power plants is simulated using the finite element method. One of four full scale turbine missile impact tests...
Conversion of WECAN to a Minicomputer Environment
The increasing use of Virtual Memory Systems (VMS) and their incorporation in a range of computers from large mainframe to micros indicates the desirability of converting WECAN to run...
Nonlinear Structural Analysis on an Engineering Workstation
The objective of this paper is to demonstrate the feasibility of solving nonlinear structural analysis problems on a desktop engineering workstation. The paper summarizes the main features...
Return to search