ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Load Factor
Spangler's load-factor formula for projecting conduits is generalized to all cases of buried rigid pipe, whether in trenches or under embankments; this is in accordance with the analytical...

Chemical Resistance of Thermosetting Resins Used for Cured-in-Place Pipe
This paper summarizes the chemistry, short term physical properties, and long term chemical resistance for representative epoxy vinyl ester, epoxy, and polyester resins that are currently...

SHRP Deformation Test?Asphalt Mix Tests and Analysis Systems
From analyses of existing information on the permanent-deformation characteristics of asphalt/binder-aggregate mixes, as well as the development of permanent deformation in pavement structures,...

Accessibility of Geotechnical Earthquake Engineering Data and the Need for Data Storage and Dissemination Standards
Ease of data access and data standards are two issues critical to the success of GIS technology when applied to earthquake hazards research problems that require geotechnical engineering...

Steel Exoskeleton Defines Architecture
The Hotel de las Artes multi-use complex in Barcelona, Spain consists of a luxury hotel/apartment tower, a commercial office building, retail, parking and other amenities. The most prominent...

Mechanistic Design Models of Loading and Curling in Concrete Pavements
Determination of the critical bending stress at the edge of a concrete pavement due to individual and combination effects of wheel loading and thermal curling is very crucial to any mechanistic...

ICAO's ACN-PCN Method and Aircraft-Pavement Interaction
Multi-wheel gear assemblies of future aircraft are not compatible with pavements rated in the ACN-PCN system given by the International Civil Aviation Organization (ICAO). The Aircraft...

Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...

A Novel Approach to Develop a Performance Based Test for Rutting of Asphalt Concrete
Asphalt concrete consists of compacted granular aggregates mixed with viscoelastic asphalt cement. The predictive phenomenological models had limited success in explaining the origin and...

Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...

Evaluation of a Large Aggregate Asphaltic Layer in an Airside Pavement
A new analytical method of designing large aggregate asphalt mixes (LAM) was used to design a thick asphalt base layer for an aircraft taxiway. The results of an analysis on the material...

Evaluation of Elastic Layered Theory for Airfield Pavements, Using Nondestructive Testing and In-Place Response Measurements
Airfield pavement deflections measured under actual aircraft loads were compared to predictions based upon elastic layer theory and moduli backcalculated from failing weight deflectometer...

Measurement and Analysis of Airside Pavement Roughness at the Dallas/Fort Worth International Airport
In May 1990, Dallas/Fort Worth International Airport management contracted with Harding Lawson Associates to implement a pavement management system for that airport. In this implementation,...

Honolulu International Airport (HIA) APM
The Hawaii Department of Transportation, in planning to meet passenger demands over the next 20 years, is providing for expanded terminal buildings. The expanse of the airport requires...

In Search of Better Load Ratings
Typically, engineers must make a number of subjective assumptions regarding loading and response behavior when they develop a load rating for civil structures. As a result, many unknowns...

All Dressed Up
Its location at 660 Madison Avenue will put the new home of clothier Barneys New York in the heart of Manhattan's exclusive midtown shopping district, but the $120 million...

Dynamic Loading
This chapter deals with those problems of finite element analysis of concrete structures, which arise from the dynamic nature of loadings. Following a short enumeration of the dynamic...

LRFD for Timber Structures
The use of load and resistance design (LRFD) methodologies is increasingly becoming the standard analysis procedure for engineering design. The concrete industry has used a variation of...

Structural Fire Resistance Design of Wood Beams and Columns: A Comparison of European and North American Practices
North American and Eurocode design methods for fire-resistive exposed wood members provide a very good example of the translation of research into practical engineering design procedures....

Lateral Loading Curves from Pressuremeter Tests
The large drilled shafts for the proposed Klamath Falls Bridge, which are to be founded in diatomaceous silts, were to be designed to withstand earthquake induced large cyclic loading....

 

 

 

 

Return to search