Piping in Earth Dams of Dispersive Clay (Paper introduced by Norman L. Ryker)
In 1971 Jim Sherard was engaged to investigate the common failure of a group of Soil Conservation Service (SCS) floodwater retarding earthfill dams built between 1957 and 1970, eleven...

Risk Analysis in Water Resources Engineering: Development and Application
Traditional engineering approaches for evaluating safety and performance in technical projects are usually based on conceptual modeling and the application of engineering standards. Risk...

Reliability of Controlled Structures Subject to Real Parameter Uncertainties
This paper presents a systematic and probabilistically consistent approach for determining the likelihood that instability will result from the uncertainty inherently present in a controlled...

Effect of Active Control to Structural Reliability
Most available results in the study of structural reliability deal with idealized mathematical representation of structures. With model supported diagnosis of the structural condition...

Optimizing Economic Returns in Drainage Design
Soil wetness is a limitation to high agricultural productivity in Northern New York (NNY) where some 325,000 ha of cropland require drainage treatment. Drainage is needed for trafficability...

Stochastic Analysis of Seasonal Hydraulic Conductivity
Infiltration data collected by a ring infiltrometer tests, for summer, fall, and spring seasons, were used to determine hydraulic conductivity using Philip's two-term infiltration equation....

Stabilizing Drop Structure by Drainage Modifications
East Drain Terminal Drop Structure is located in East Drain, an open toe drain of Palmetto Bend Dam, in the tide water area of south Texas. The drop structure was threatened by piping...

Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....

Technology Transfer for Projects in South America
Engineering services were provided for three projects in South America. One project was located in the Pampa Region of Argentina and two others in northern Brazil. The projects were: 1)...

Design and Maintenance Factors Affecting Application Uniformity of Low Pressure Center-Pivot Irrigation Systems
Uniformity tests were conducted on 30 center-pivot sprinkler systems installed with one of six different low pressure nozzle types or high pressure impact sprinklers. Well designed and...

Progress Report ARS/SCS Runoff Curve Number Work Group
The Soil Conservation Service (SCS) Runoff Curve Number (RCN) procedure works well as a single event model to estimate design storm runoff volumes from a small agricultural watershed....

Simulation of Runoff and Infiltration of Disturbed Land
Disturbances of land due to human and natural causes change the porosity and hydraulic conductivity of the soil. A simulation model of conjunctive surface-subsurface flows can be used...

Stochastic Simulation and Optimization of Irrigation Canal Network Flows
This paper investigates the effects of parametric and objective uncertainty on simulation and optimal hydraulic design of irrigation canal networks. A model of spatially-varied flow in...

Darcy-Weisbach Roughness Coefficients for Selected Residue Materials
A laboratory study is conducted to measure Darcy-Weisbach roughness coefficients for corn, cotton, peanut, pine needles, sorghum, soybeans, sunflower, and wheat residue. Varying rates...

Calculation of Runoff from Rainfall Using NURP Data
Peak runoff flows and flood hydrographs are important elements in the design of drainage and flood-protection structures. The validity of methods for predicting peak flow from rainfall...

Water's New World
Potential applications of computer automation in the water industry have become increasingly apparent in the last several years. A growing number of water agencies are considering purchasing...

Pile Lateral Load Test in the Port of Los Angeles
Recent wharf projects in West Coast ports have featured rock dikes to contain backland fill and the use of vertical piles embedded in the rock dikes to resist lateral loads. This paper...

Measured Fill Performance at Berths 212-215 in the Port of Los Angeles
This paper summarizes the performance of an instrumentation fill constructed in open water in the Port of Los Angeles (Port). A new container-handling facility was constructed that consisted...

Earthquake Damage Repair and Retrofit of the Seventh St. Terminal Port of Oakland
The October 17, 1989 earthquake resulted in the collapse of the two-level Cypress St. Freeway in Oakland. Television and newspaper coverage revealed the tragic loss of life and property...

A Computational Berthing Model for the Design of Fender Systems
The IRF numerical model has not been widely applied to the design of fender systems although the method has been extensively confirmed by hydraulic model tests and partially verified by...

 

 

 

 

Return to search