System Impacts on MRS Operations
This paper describes the results of analyses conducted to evaluate impacts on monitored retrievable storage (MRS) operations and design resulting from possible changes in the CRWMS Reference...
Reliability Modeling of an Engineered Barrier System
The Weibull distribution is widely used in reliability literature as a distribution of time to failure, as it allows for both increasing failure rate (IFR) and decreasing failure rate...
Assessments of System Impacts of Spent Fuel Thermal Characteristics and Emplacement Rates
Analyses conducted to evaluate the impacts spent fuel thermal characteristics and emplacement rates might have on the thermal conditions in a candidate geologic repository at the Yucca...
Robust-Multibarrier Waste Package Thermal Evaluation
One of the key issues to be addressed in developing a successful permanent radioactive waste storage concept is the thermal effect due to the spent nuclear fuel (SNF). The thermal output...
Large-Scale in Situ Heater Tests for Hydrothermal Characterization at Yucca Mountain
To safely and permanently store high-level nuclear waste, the potential Yucca Mountain repository site must mitigate the release and transport of radionuclides for tens of thousands of...
Micromechanics of Deformation in Topopah Spring Tuff, Yucca Mountain, Nevada
Samples of Topopah Spring tuff from Yucca Mountain, Nevada have been tested and analyzed. Laboratory tests conducted include standard uniaxial and triaxial compression tests, and special...
Durability Testing of the High-Capacity GA-4/GA-9 Trailer
General Atomics (GA) is under contract to the US Department of Energy (DOE), Idaho Field Office, to develop two legal-weight truck from-reactor spent-fuel shipping casks with trailers....
Design of Pile Foundations
This handbook,
A Program Architecture for Interactive Nonlinear Dynamic Analysis of Structures
This paper discusses a general object-oriented architecture for use in nonlinear dynamic structural finite element analyses. In light of the special issues surrounding such analyses, the...
Computer Methods Used on Seismic Retrofit Projects
Over a relatively short period of about twenty years, personal computers (PC's) have replaced slide rules in most engineering calculations. PC's are now staple equipment in every engineering...
Qualitative Formulation of Load Paths Through a Functional Description of Structures
The past few decades have seen major advances in computer tools to analyze complex structures and loadings. For the most part, these programs have focused on two areas - A, programs for...
Stress Analysis in Concrete with Cooling Pipes
A substructure method of finite element analysis is adopted in this paper to simulate heat transfer and thermal stresses in a concrete dam. The massive concrete structure is cooled by...
PDS: An Expert System for Distress Diagnosis of Flexible Pavements in Taiwan
Pavement distress diagnosis requires a significant amount of engineering judgement which is difficult, if not impossible, to be quantified. This is an excellent domain for the development...
An Application of Neural Networks to Hysteretic Modeling of Steel Structures
This paper describes an application of the neural networks to realistic hysteretic modeling. The neural networks learn from sample data (training cases) and make predictions for new cases....
Non-linear Analysis of a Cable Stayed Bridge
A concrete single-pylon cable-stayed bridge has been analyzed to investigate the ultimate capacity. Two different methods were used to investigate the nonlinear behaviour. First, a simplified...
Masonry Cladding, an Expert System for Distress Diagnosis
An expert system for masonry cladding failure diagnosis was developed. The system provides a heuristic procedure for diagnosing the most probable causes of cladding distresses and failure...
Computer-Aided Guyed Tower Analysis for the Rehabilitation of TTI Tower, Baltimore
A large guyed television tower owned by Television Tower Inc. of Baltimore is currently being analyzed in order to evaluate the capacity of the tower to support additional broadcasting...
Deriving Alternative Structural Modifications Based on Qualitative Interpretation at the Conceptual Design Stage
Current computer tools provide little support in deriving alternative modifications based on qualitative structural interpretation of a conceptual design. This paper presents a behavior-based...
Reducing Ambiguity in Qualitative Reasoning
Qualitative reasoning derives the behavior of a physical system using a representation of the fundamental principles for the domain. In qualitative reasoning parameters are mapped into...
A Numerical Procedure to Compute Bearing Capacity of Shallow Foundations
A simple numerical procedure of calculation of bearing capacity of shallow foundation is proposed. This procedure employs the Terzaghi-Prandtl model of general shear failure. In this paper,...
Return to search